MeshPL
Hazard to Others
Posts: 329
Registered: 20-4-2015
Location: Universe
Member Is Offline
Mood: No Mood
|
|
Chlorates, sulfates and Pb electrode
It is known that chlorates can be produced by anodic oxidation of chlorides with lead dioxide anode. It is also known that regular lead anode is not
satisfactory when producing chlorates due to excessive corrosion. Finally, lead electrodes are very good when used for electolysis of solutions
containing sulfates, due to a layer of lead dioxide forming on the surface of the anode.
Lead electrode that was anodicaly oxidised in sulfate containing solution and has a thin layer of lead dioxide would still corrode too much when used
to produce chlorates in ordinary way.
But I came up with the idea: what if the electrolyte for producing chlorate contained, apart from sodium/potassium chloride some kind of sulfate? This
should stabilise the layer of lead dioxide forming on the anode I think and decrease the corrosion of the anode to a feasible level. Should I try it?
How much sulfate and chloride should be in the solution?
|
|
|
MeshPL
Hazard to Others
Posts: 329
Registered: 20-4-2015
Location: Universe
Member Is Offline
Mood: No Mood
|
|
Whatever, tried reading some papers and it seems it will not work as intended.
|
|
|
mysteriusbhoice
Hazard to Others
Posts: 477
Registered: 27-1-2016
Member Is Offline
Mood: Became chemistry catboy Vtuber Nyaa
|
|
tried this once before with sodium sulfate and my solution just ended up brown like flint water!! and was left with no anode...
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
