conducter
Hazard to Self
Posts: 84
Registered: 7-10-2006
Member Is Offline
Mood: No Mood
|
|
Dichloromethane otc product
i found a product online that is used as a degreaser and is available at many auto stores.
its MSDS says it contains:
Carbon Dioxide 1-5%
Dichloromethane 40-70%
Ethyl benzene 1-5%
Toluene 15-40%
Xylene 15-40%
CO2 obviously the propellant. Ethyl benzene, toluene, xylene all boil way over the b.p. of DCM. So swim is wondering is this a good product that could
be available to order? it is sold in a 12 pack case because swim thinks this brand only has the non-chlorinated brand at the local auto stores.
Also this would have the advantage of not having that nasty white shit in the paint strippers with DCM and methanol.
|
|
|
PainKilla
Hazard to Others
Posts: 306
Registered: 29-4-2004
Member Is Offline
Mood: No Mood
|
|
What is with the swimming? It's not even illegal to do so at this time of year.
I think YOU should do an MSDS search because much better products exist... and I don't even know why one would bother with such an impure source to
begin with... 40%?
Spend an hour or two searching, there are products that are ~75% DCM, ~5% polymer, ~20% propellant... aka, utsfe and find it and stop using crappy
sources.
And to answer your question... no, that's not a good product to order. Ever hear of cancer? Well, you will once you use your "Dichloromethane"...
|
|
|
BromicAcid
International Hazard
Posts: 3253
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
Come on PainKilla, don't go throwing around cancer as a deterrent, most of the things we work with are carcinogens, probable carcinogens, likely
carcinogens, or future carcinogens so that shouldn't even be a deterrent we have to mention.
Conducter, there are better alternatives out there for methylene chloride but I don't know your exact situation and this product might be easier for
you to get than alternatives and you mention avoiding the 'nasty white shit' is this from experience or from what you have read elsewhere, as
PainKilla said this has been gone over with success by some of our members. Just looking at it I can see distillation might be a problem. Despite
boiling point differences, toluene and xylene will come over with your methylene chloride, they have appreciable vapor pressures after all and it will
be somewhat akin to steam distillation. So you will need a good fractioning column, that is provided that they do not form an azeotrope to begin
with. It's hard to predict azeotropes so you might have to hit the literature, especially since the methylene chloride makes up less than half of
your starting material.
There are references around that will give tables of azeotropes which may prove helpful. The separation likely won't be stellar the first time so
multiple distillations may be in order. I don't see it as impossible or anything but you might wish to try your hardest to get only one can of this
material to experiment on before making an investment that may prove fruitless.
|
|
|
Aqua_Fortis_100%
Hazard to Others
Posts: 302
Registered: 24-12-2006
Location: Brazil
Member Is Offline
Mood: †
|
|
hmmm...
i'm searching for the best OTC solvent over the hardware stores and such..but i've never either found that have a decent description of the contents,
or MSDS..NEVER!!!
So what i should keep in mind to identify such solvents without any fancy technicques or apparatus?(all of my are DIY glassware,etc)
the only i know is that the DCM doesn't take fire..so i have to look the label of the solvent and dont want to see the "flammable" sign. But as stated
by conducter , some flammable additives can be come also. Furthermore, some chlorinated solvents are also non flammable, but AREN'T the desired DCM...
another propertie is that usually boils at ~ 40*C... but i dont want to bet in a solvent that i dont know entirely <u>before</u> buying
them.. loss of money is a bad thing to a poor chemist as i.
so, are there a "magic" thing or indication that i can see in any solvent to give me a good chance to recognize the DCM???
[Edited on 4-7-2007 by Aqua_Fortis_100%]
"The secret of freedom lies in educating people, whereas the secret of tyranny is in keeping them ignorant."
|
|
|
oxybate
Harmless
Posts: 38
Registered: 14-9-2006
Member Is Offline
Mood: No Mood
|
|
Damn, Conductor. After all these questions, one would have though you'd been able to synthesize that MDMA by now. Hahah!
|
|
|
Slimz
Hazard to Others
Posts: 123
Registered: 18-9-2007
Member Is Offline
Mood: Inquisitive
|
|
I am also in the search for DCM has anyone come up with a good (high percentage) product that's widely available yet? Is home syntheses an option?
i was thinking about just buying it here
http://www.sciencestuff.com/prod/Chem-Rgnts/C1680
Johnny was a chemist’s son, but now he is no more. What Johnny thought was H2O was H2SO4
|
|
|
MagicJigPipe
International Hazard
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
I found a product at AutoZone that contained only DCM and MeOH. I don't remember the exact name of it, however, and I can't go look right now for
certain reasons  I'm not sure of the percentages but those 2 substances' boiling
points are far enough apart that they should be easy to seperate. Right?
|
|
|
smuv
National Hazard
Posts: 842
Registered: 2-5-2007
Member Is Offline
Mood: Jingoistic
|
|
They form an azeotrope consisting of 93% DCM which boils at 37.8 degrees. The DCM obtained is good enough for most purposes. If you want methanol
free DCM run a forum search I think it has been discussed.
|
|
|
chemalien
Harmless
Posts: 2
Registered: 13-10-2007
Location: Bella Bella Coola
Member Is Offline
Mood: Cropped Out
|
|
dcm
4L - $80 - Anachemia Science. Canada
BEWARE OF GOD
|
|
|
Eclectic
National Hazard
Posts: 899
Registered: 14-11-2004
Member Is Offline
Mood: Obsessive
|
|
Small industrial chemical supply company: $85 for 5 gallons. 
|
|
|
Fleaker
International Hazard
Posts: 1252
Registered: 19-6-2005
Member Is Offline
Mood: nucleophilic
|
|
I'm also not adverse to selling any. It's ACS, water-free, DCM. $10/L. Pretty soon I should be making CHCl3 and CCl4 by photocatalytic chlorination of
DCM, Just gotta get a mercury vapor light for UV.
Neither flask nor beaker.
"Kid, you don't even know just what you don't know. "
--The Dark Lord Sauron
|
|
|
Flamethrowa
Harmless
Posts: 5
Registered: 25-10-2007
Member Is Offline
Mood: No Mood
|
|
Guys-
Circa 1850 Furniture Stripper, manufactured by Swing Paints Ltd. I got the MSDS from www.msdsonline.com, it says DCM 60-99%, Methanol 5-10%.
Simply add water and decant.
(Do note that I have not tried this yet; the can is still sitting on my shelf)
|
|
|
Antwain
Hazard to Others
Posts: 252
Registered: 21-7-2007
Location: Australia
Member Is Offline
Mood: Supersaturated
|
|
I saw a product in a hardware store here the other day which was '990g/L methylene chloride'. That seems good for about, what, 70-80%. It was a paint
stripper. AU20/L or $50/4L
|
|
|
mewk
Harmless
Posts: 1
Registered: 14-8-2006
Member Is Offline
Mood: No Mood
|
|
DCM is also widely used as a glue-bonding agent/solvent for acrylics, Usually +90%....
Just something to think about....
|
|
|
chloric1
International Hazard
Posts: 1147
Registered: 8-10-2003
Location: GroupVII of the periodic table
Member Is Offline
Mood: Stoichiometrically Balanced
|
|
| Quote: | Originally posted by Fleaker
I'm also not adverse to selling any. It's ACS, water-free, DCM. $10/L. Pretty soon I should be making CHCl3 and CCl4 by photocatalytic chlorination of
DCM, Just gotta get a mercury vapor light for UV. |
I also considered this process as it occurs at 25C. In fact one of the old text said regular sunlight can be used. I would think the summer months
would be best. I cannot remember if the mercury vapor lamp has the shortwave UV that is required. They should not be hard to obtain. Halogen lamps
should work too. This morning at work I seen a box of HUGE mercury vapor lights and they where 250 watts I mean these where like 10 inches long and 4 inches wide! That certainly would meet your needs.
Fellow molecular manipulator
|
|
|
Fleaker
International Hazard
Posts: 1252
Registered: 19-6-2005
Member Is Offline
Mood: nucleophilic
|
|
I'm interested, how much for 2 of them? Also, still have any of that benzene lying about? U2U if you want...
Neither flask nor beaker.
"Kid, you don't even know just what you don't know. "
--The Dark Lord Sauron
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
