woelen
Super Administrator
Posts: 8012
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Mysterious bottle
Here follow a few pictures of a weird bottle. It is a nice piece of glasswork, but I'm wondering what it is used for.
It is not my own bottle, but a bottle of someone I know. If you need more info about the bottle, then as for it, and I can ask for more description or
pictures. But if someone recognizes this kind of bottle, then of course I would be very pleased to be notified about that. It is a funny looking
thing, but I don't see a real practical use for it. Any ideas?
|
|
|
Eclectic
National Hazard
Posts: 899
Registered: 14-11-2004
Member Is Offline
Mood: Obsessive
|
|
It sort of looks like a nebulizer that doesn't really fit the bottle. Maybe an automatic dispenser? I can't make out the inner details.
[Edited on 9-10-2006 by Eclectic]
|
|
|
not_important
International Hazard
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Yes, it looks somewhat like an auto-dispenser, but the upper section isn't very clear. I'm assuming that the outer upper section is cap to cover the
works when not in use, a shot or two with that removed might be useful.
|
|
|
DrP
National Hazard
Posts: 625
Registered: 28-9-2005
Member Is Offline
Mood: exothermic
|
|
Looks a bit like a demijohn - can't make out the workings in the top part though. Could be a fancy bubbler unit to relieve pressure during home
brewing of wine. Although if it came out of a lab then this obviously won't be the case.
|
|
|
matei
Hazard to Others
Posts: 205
Registered: 16-9-2006
Member Is Offline
Mood: No Mood
|
|
It's a spray bottle for developing thin-layer chromatography plates. The bottle to which it is attached looks too large though.
|
|
|
not_important
International Hazard
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by matei
It's a spray bottle for developing thin-layer chromatography plates. The bottle to which it is attached looks too large though.
|
Doesn't look quite right for that. There usually is a tube for the air feed, and either a very fine tube inside the larger one, or an obvious nozzle
near the top.
http://www.sigmaaldrich.com/Area_of_Interest/Analytical__Chr...
http://www.coleparmer.com/catalog/product_view.asp?sku=34695...
|
|
|
YT2095
International Hazard
Posts: 1091
Registered: 31-5-2003
Location: Just left of Europe and down a bit.
Member Is Offline
Mood: within Nominal Parameters
|
|
I`m currious about those 2 wires in it?
Ph? Thermo-couple? electrolysis?
Cold Fusion!
\"In a world full of wonders mankind has managed to invent boredom\" - Death
Twinkies don\'t have a shelf life. They have a half-life! -Caine (a friend of mine)
|
|
|
matei
Hazard to Others
Posts: 205
Registered: 16-9-2006
Member Is Offline
Mood: No Mood
|
|
Those aren't wires. They are stripes enbedded in the glass cap. Old laboratory glass tubes were usually marked with a stripe which had a colour
according to the respective glass type.
|
|
|
Mr. Wizard
International Hazard
Posts: 1042
Registered: 30-3-2003
Member Is Offline
Mood: No Mood
|
|
It almost looks like the self measuring liquor dispensing things they use in bars. 
|
|
|
YT2095
International Hazard
Posts: 1091
Registered: 31-5-2003
Location: Just left of Europe and down a bit.
Member Is Offline
Mood: within Nominal Parameters
|
|
| Quote: | Originally posted by matei
Those aren't wires. They are stripes enbedded in the glass cap. Old laboratory glass tubes were usually marked with a stripe which had a colour
according to the respective glass type. |
Cool and thnx for that, I`ll rest easy now knowing it`s some sort of Cold Fusion bomb 
and no, I have no idea what function it performs, sorry.
\"In a world full of wonders mankind has managed to invent boredom\" - Death
Twinkies don\'t have a shelf life. They have a half-life! -Caine (a friend of mine)
|
|
|
chromium
Hazard to Others
Posts: 284
Registered: 27-6-2005
Member Is Offline
Mood: reactive
|
|
Is not this just overcomplicated bottle for pouring liquids?
Upper test tube like thing is stopper and if its removed smaller tube lets air in and bigger one is where liquid comes out when bottle is tilted.
When all think alike, then no one is thinking. - Walter Lippmann
|
|
|
YT2095
International Hazard
Posts: 1091
Registered: 31-5-2003
Location: Just left of Europe and down a bit.
Member Is Offline
Mood: within Nominal Parameters
|
|
yeah, I see where you`re going with that, like some sort of decanter for PPTs that doesn`t cause excessive turbulance and just takes off the top
liquer.
\"In a world full of wonders mankind has managed to invent boredom\" - Death
Twinkies don\'t have a shelf life. They have a half-life! -Caine (a friend of mine)
|
|
|
woelen
Super Administrator
Posts: 8012
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Thanks for all responses so far. I asked for pictures of the top part and here they are.
Also, it can be added, that this bottle is not something for dispensing a liquid for use in a bar. The glass is so-called Jena-glass, high quality lab
glassware and not something to be used in common household, shops or bars.
All parts also are very precisely made for each other. All parts fit perfectly into each other, and so this is not an assembly of different parts of
different pieces of labware. This whole thing is made with a purpose. But we don't know what purpose.
I like the idea of chromium, it indeed could be something like that. The thin tube is bent upwards, if the mouth of the larger tube is directed
downwards for pouring. This indeed could be used as a pouring device, provided, the bottle is not too full.
[Edited on 12-10-06 by woelen]
|
|
|
unionised
International Hazard
Posts: 5126
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Well, to me it looks like a sprayer like this one (Sorry, but this is the best picture I could find online)
http://www.alltechweb.com/productinfo/technical/datasheets/1...
|
|
|
woelen
Super Administrator
Posts: 8012
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I doubt it is a sprayer. The little tube inside the bottle does not go all the way down to the bottom. If this were a sprayer, then it would be very
annoying. Only approximately 25% of volume is accessible due to the short tube. So, I still think more in the direction of the decanting botle.
|
|
|
labi
Harmless
Posts: 15
Registered: 12-10-2005
Member Is Offline
Mood: No Mood
|
|
matei it is not a TLC sprayer. it may be some type of cold diffuser used to diffuse volatile essential oils
|
|
|
woelen
Super Administrator
Posts: 8012
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Could this bottle be used for inhaling vapor of some volatile compound?
The tube, sticking into the bottle only is short, such that it is above the surface of the liquid. The bottle could also be filled with a sponge,
impregnated with the liquid from which the vapor must be inhaled. The short tube does not prevent such usage.
If you look very well, then you can see that there is a small piece of wadding in the second small tube, which could well be used as the air-inlet,
when you are inhaling. This tube is closed by the piece of wadding. This prevents evaporation of the liquid, when the bottle is not used. I assume the
piece of wadding is removed when one wants to inhale. On inhaling, air is drawn from the bottle, and through this tube, fresh air can be drawn into
the bottle, going along the liquid, and then going to the bigger "mouth".
|
|
|
Mr. Wizard
International Hazard
Posts: 1042
Registered: 30-3-2003
Member Is Offline
Mood: No Mood
|
|
The tube running to the side of the plug could be for regulating air flow as you pour. By putting your fingertip over the hole you can carefully
regulate the liquid flow rate. I have a gasoline (petrol) can with a vent hole that serves the same function. It's very handy when you don't want to
spill anything, and the air intake keeps the liquid flow smooth without periodic 'glugs'.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
