kadriver
Hazard to Others
Posts: 196
Registered: 7-11-2012
Location: United States
Member Is Offline
Mood: Thankful
|
|
How to use a sulfuric acid stripping cell to deplate gold plated jewelry VIDEO
Here is part 1 of 2 showing how to construct and operate a sulfuric acid stripping cell to reverse-plate gold off of gold plated jewelry and other
gold plated items.
Part 2 will be a few days away because I am going to try to deplate 10 pounds of gold plated scrap jewelry to see what kind of yield it produces.
https://youtu.be/WgprlL-wmCk
Any comments and critique welcomed.
kadriver
|
|
|
kadriver
Hazard to Others
Posts: 196
Registered: 7-11-2012
Location: United States
Member Is Offline
Mood: Thankful
|
|
Here is part two;
https://youtu.be/yb6xPB6IHGA
kadriver
|
|
|
cyanureeves
National Hazard
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
i almost cringe at the amount of sulfuric acid used because it was nowhere to be found in my spooked town for years.i dissolved a 1gram gold bar of
gold with assay card and number.when i added the smb i noticed a light blue tint and was kinda dissapointed.the following morning the solution was
crystal clear and all the gold dust settled at the bottom.i had the solution in a flask after the decanted it and scooped out the gold.today 2weeks
later i still have the clear solution which is now blackened again with particles and the blue tint has returned.this gold was from 2nd market ebayer
and i recovered too much gold for it to be plated. i have separated gold from karated rings and the recovered gold never tinted the solution blue.i
also recall using this gold bar as an cathode for plating and now all my plated stuff comes out rose gold when i use my platinum mesh as cathode.i
hope i plate out all the copper before i deplete my gold.of course you did a great video too.again!
[Edited on 9-23-2015 by cyanureeves]
|
|
|
kadriver
Hazard to Others
Posts: 196
Registered: 7-11-2012
Location: United States
Member Is Offline
Mood: Thankful
|
|
Quote: Originally posted by cyanureeves  |
i had the solution in a flask after the decanted it and scooped out the gold.today 2weeks later i still have the clear solution which is now blackened
again with particles and the blue tint has returned.this gold was from 2nd market ebayer and i recovered too much gold for it to be plated.
|
I always add ALL my gold refining waste to my "stock pot". The stock pot is full of pieces of copper. Any traces of gold or platinum group metals in
the gold refining waste will "cement" out onto the copper as a black powder. I bubble air through it to promote the reaction, then decant the barren
liquid to my waste treatment bucket that is charged with pieces of iron. The copper cements out onto the iron and the copper powder is then added back
to my stock pot to cement out more traces of precious metals.
Please see the video;
https://youtu.be/P86Ch6w2V7I
kadriver
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
