throughput
Harmless
Posts: 1
Registered: 8-2-2015
Member Is Offline
Mood: No Mood
|
|
Condenser OTC Brass
Condenser OTC Brass
https://www.youtube.com/watch?v=yalItwXLCjw
|
|
cyanureeves
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
moonshine!
|
|
macckone
Dispenser of practical lab wisdom
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
Brass should be kept to a minimum is a still.
It leaches zinc which gives an off flavor.
And only food grade should be used ie. No leaded brass.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1702
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Did you look at the vid? It's a copper tube with an outer brass cooler.
|
|
macckone
Dispenser of practical lab wisdom
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
No I didn't watch the video before posting.
Thanks for correcting me.
Of course the standard copper outer shell is going to be cheaper.
I use a pvc outer shell myself.
|
|
Zombie
Forum Hillbilly
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1700
Registered: 13-1-2015
Location: Florida PanHandle
Member Is Offline
Mood: I just don't know...
|
|
Quote: Originally posted by macckone ![](images/xpblue/lastpost.gif) | Brass should be kept to a minimum is a still.
It leaches zinc which gives an off flavor.
And only food grade should be used ie. No leaded brass. |
In this case the brass is not in contact with the ETOH. Just the cooling water for the condenser.
Also brass does not impart a taste but the real concern was in Lead in the brass leeching into ETOH Vapor.
That is a non issue today, as modern Brass is lead free.
They tried to have me "put to sleep" so I came back to return the favor.
Zom.
|
|
macckone
Dispenser of practical lab wisdom
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
All brass is definitely not lead free.
Food grade brass is.
Other brass may not be especially imported brass.
|
|
Zombie
Forum Hillbilly
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1700
Registered: 13-1-2015
Location: Florida PanHandle
Member Is Offline
Mood: I just don't know...
|
|
As of Jan. 4, 2014, ALL brass sold in the US for potable water must be lead free,.
This applies to all imported brass as well.
Granted if you dug thru some old bits... Yes you could find lead contaminated brass.
http://www.fwwebb.com/lead_free/index.php
They tried to have me "put to sleep" so I came back to return the favor.
Zom.
|
|
macckone
Dispenser of practical lab wisdom
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
I said food grade is lead free.
Brass used for boilers, boat fittings, industrial machinery
Can still contain lead and is easily mistaken for
Food grade.
|
|
violet sin
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1477
Registered: 2-9-2012
Location: Daydreaming of uraninite...
Member Is Offline
Mood: Good
|
|
I noticed here about a year and a half ago in california, there were hardware stores all over the place with a TON of brass fittings for super cheap.
I bought a bunch because I was tired of the 5$ each. found out later it was lead stock sell off, that they totally didn't mention in any way shape or
form... I wanted mine for various tinkering projects or to melt, so not too offended at being offered lead heavy stuff right before they legally
couldn't sell it. but still seems underhanded.
the condenser is fairly cool, but I prefer mine: https://www.youtube.com/watch?v=kPdcWWZ4Piw
information section has a lot of details on how to and a bunch of "don't sue me" crap. I was concerned at the time, about people getting hurt. but
realized I should have to shoulder the responsibility of their safety. enjoy, or not, it works great with MeOH, Isoproply and acetone just fine.
these days I have it rigged to an aluminum water bottle with a rubber bung. this is put in a small styro-ice chest, through a hole cut in the top.
put a garbage can liner in it, ice and an aquarium pump, and you have your receiving flask and water supply for the condenser. used it for extracts
from plants, and reused the solvents. plenty of good smells and colors had cheaply when I was getting back into chem.
-VS
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1702
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Speaking of stills and choice of metals: Any thoughts on copper and brass for distilled water? I need to assemble a small still for things like DW and
perhaps separation of some solvents. A simple pot still should suffice, it might look crude but it should get the job done for a minimal cost. Pot
(and if needed, the column) will be made from stainless, but I'm seriously considering a copper/brass air condenser for maximum flexibility. I just
did some quick calculations and there is no practical way to make a working air condenser capable of dissipating 1 kW out of stainless, the thermal
conductivity is just too low.
I'm just worried about copper contamination, I will use this for anything from analysis to chlorate production and battery maintenance. Maybe I'm
overly cautious, but it's much simpler to get things right than to fix poor designs later on.
We're not banging rocks together here. We know how to put a man back together.
|
|
Zombie
Forum Hillbilly
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1700
Registered: 13-1-2015
Location: Florida PanHandle
Member Is Offline
Mood: I just don't know...
|
|
You're correct about the air condenser, It just wont work. The simplest condenser is a water jacketed Liebig.
To save some grey matter there is a calculator here...
http://homedistiller.org/calcs/cond_calc
Now on to the still...
For plain distilled water Stainless is best. You can use Silicone to seal bits or make quick connects.
For Chlorates one of the real chemists here should help you. I could look it up but I'd rather you get the correct information.
Depending on the size of the unit, simple hardware store items can be used to assemble something. How large / small are you thinking?
I can help with a parts list if you like.
They tried to have me "put to sleep" so I came back to return the favor.
Zom.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1702
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
I can make it myself, don't worry about that. I'm thinking a 2-3 liter pot, interchangeable column (just a straight piece of insulated tube for DW to
avoid carry over), and a suitable condenser. I rechecked my math and found I had swapped a few numbers, the difference in conductivity is
insignificant. 1 meter of 10mm tube and forced air can perhaps dissipate a few hundred watts at best.
But that still doesn't solve all my problems, I'm having trouble finding suitable SS tubing. Best I can find is 90/10 copper/nickel brake line tubing.
We're not banging rocks together here. We know how to put a man back together.
|
|
Zombie
Forum Hillbilly
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1700
Registered: 13-1-2015
Location: Florida PanHandle
Member Is Offline
Mood: I just don't know...
|
|
Grainger. http://www.grainger.com/search?nls=1&searchQuery=stainle...
Or OnLine Metals. http://www.onlinemetals.com/
Even Home Depot type stores. Re purpose a Towel rack or something similar.
For things like a water jacket you can use copper adapters / reducers, and silver solder them to stainless with a plain Mapp torch.
For the column (if you want a full reflux column) I use Stainless Scrubbies like you use in the kitchen for packing, and a simple reflux coil made
from stainless Natural Gas line in the top of the column.
Here's a copper "cold finger" condenser. it's much easier to build with the corrugated stainless.
They tried to have me "put to sleep" so I came back to return the favor.
Zom.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1702
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Ordering from the US isn't really an option for me, but I still have a few possible sources to check out. We'll se what turns up, if not I might make
one out of Cu/Ni ant just take my chances.
We're not banging rocks together here. We know how to put a man back together.
|
|
Zombie
Forum Hillbilly
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1700
Registered: 13-1-2015
Location: Florida PanHandle
Member Is Offline
Mood: I just don't know...
|
|
Try Marine supply sources. Items like bow rails... That tubing is usually from 15mm on up.
Also for a column / water jacket, try Auto exhaust shops. They could even make the bends, and reduce the sizes or flare ends.
Sanitary clamps, and PTFE gaskets are easy to find.
I forgot you were not in the US.
[Edited on 2-23-2015 by Zombie]
They tried to have me "put to sleep" so I came back to return the favor.
Zom.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1702
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
I was planning on using thin tube to make a coil placed in a bigger tube, but a simple cooling jacket would be acceptable and easier to source
materials for. I'll figure it out, don't worry. Luckily I have access to both a lathe and a mill, and I can get things welded if I really need to.
Still would like to know more about the suitability of copper, but I don't rally have any hope of it being a good solution.
We're not banging rocks together here. We know how to put a man back together.
|
|
Zombie
Forum Hillbilly
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1700
Registered: 13-1-2015
Location: Florida PanHandle
Member Is Offline
Mood: I just don't know...
|
|
Stainless is very easy to silver solder if you electro plate it with copper first. Copper Sulfate I think, and a battery charger.
Or
SSQ Silver solder flux. https://www.youtube.com/watch?v=PU15lHgTYEI
I have done both methods, and either one allows you to adapt parts easily.
No lathes or TIG welding needed.
They tried to have me "put to sleep" so I came back to return the favor.
Zom.
|
|