nannah
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 136
Registered: 20-12-2013
Member Is Offline
Mood: No Mood
|
|
Modify compressor to vacuum pump?
Hi guys. I have an old compressor that i want to modify so i can use it as a vacuum pump. I just have to say that its not an fridge compressor pump.
Thanks in advance.
|
|
Marvin
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 995
Registered: 13-10-2002
Member Is Offline
Mood: No Mood
|
|
Entering into new levels of vague is always difficult. Clearly you've searched the forum and found what questions were successfully answered in the
past and then avoided those errors. Your only major mistake was telling us that it isn't a fridge pump, which narrows possibilities. We have no idea
what you want it for or what skills or tools you have, so that's good.
On a scale of
0 (Easy to answer and no more information needed to do so)
to
10 (Impossible to answer, question contains statements that cannot be meaningful simultaneously)
I give your question a 6.
To move to a 7 or 8 you'll need to stretch your imagination a bit. Think compressor to an artificial heart or holographic TV.
|
|
Mesa
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 264
Registered: 2-7-2013
Member Is Offline
Mood: No Mood
|
|
I believe he is talking about an air compressor i.e. for spray guns.
|
|
violet sin
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1477
Registered: 2-9-2012
Location: Daydreaming of uraninite...
Member Is Offline
Mood: Good
|
|
which come in hobby size air brush to several hundred PSI multi-gallon air tank construction versions for spraying houses. one with an attached tank
for storage and high volume air, and one for on demand low volume air( air brush pump). so the point has merit.
but here is one fix for 12v tire pump: kinda messy
http://www.instructables.com/id/convert-a-tire-inflator-type...
another one for a similar machine that is a bit easier
https://www.youtube.com/watch?v=uyG2_-QNjZY
this one is for a craftsman job site kind of compressor:
http://forums.bimmerforums.com/forum/showthread.php?1210620-...
but they all revolve around finding the air intake and attaching a hose barb and hose. but in the craftsman version with attached tank, you might
want to remove the bottom plug completely unless you want stuff congregating in there.
|
|
CuReUS
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
read this book it might help you ![;)](./images/smilies/wink.gif)
https://parazite.pp.fi/Nimble.pdf
|
|
jock88
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 505
Registered: 13-12-2012
Member Is Offline
Mood: No Mood
|
|
A refrigerator pump IS a compressor.
See the thread called:
Let the questions on the refrigerator compressor being used as a vacuum pump commence and never stop. ![:P](./images/smilies/tongue.gif)
Its a sticky at the top of apparatus and reagent aquisiton
[Edited on 11-10-2014 by jock88]
|
|
Mesa
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 264
Registered: 2-7-2013
Member Is Offline
Mood: No Mood
|
|
I've done exactly this modification with my 2.5hp 40l compressor, I found a drain cleaning tool which happened to have the same thread as the filter
housing, and used tubing the exact diameter required to fit the barbs on my own glassware.
I've still not figured a safe way of testing it out yet however.
|
|
jock88
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 505
Registered: 13-12-2012
Member Is Offline
Mood: No Mood
|
|
When is the maximum load on the motor of the Vacuum pump?
Is it when there is little or no gas going through the pump or when it is open to the air.
The pump that I have is a Welch duoseal. The manual states that if it is run open to the air or of a large leakage of gas is going into the pump
(working above 20 microns or so) the pump will get hot.
From my experience there is less load on the motor when the pump is open to the atmosphere and when you close it off (I have not measure the vacuum)
the belts start show more strain. The half horse motor I have is not fit to run the pump when it is closed to the atmosphere (pulling a vacuum).
Why do they run hot when open to the atmosphere. You would imagine there is less load on both pump and motor and air going through the pump would help
to cool it anyways?
j88
|
|