malford
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 116
Registered: 17-6-2013
Member Is Offline
Mood: No Mood
|
|
Bubbles in Pyrex Glassware
I recently purchased for an exceptionally good price a 5000ml Pyrex round bottom flask with three necks.
You can see a picture from the seller: ![](http://i.imgur.com/o2eOVt0.jpg)
It has no Pyrex part number and a large bubble in the glass on the bottom. The bubble is roughly 1 mm. I have two questions.
1) are Pyrex components all stamped with part numbers? Could this indicate counterfeit?
2) could the bubble cause any problems with heating?
[Edited on 21-10-2013 by malford]
|
|
kristofvagyok
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 659
Registered: 6-4-2012
Location: Europe
Member Is Offline
Mood: No Mood
|
|
Bubbles are usually normal if the glass is repaired, so if it has been broken once and someone "fixed it".
It usually causes no problem, but it's good to test it with something unexpensive: e.g.: boil some water in it and try out that how does it like
vacuum while heated.
I have a blog where I post my pictures from my work: http://labphoto.tumblr.com/
-Pictures from chemistry, check it out(:
"You can’t become a chemist and expect to live forever."
|
|
plante1999
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
Like if there was a good market for counterfeit pyrex glassware...
[Edited on 22-10-2013 by plante1999]
I never asked for this.
|
|
malford
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 116
Registered: 17-6-2013
Member Is Offline
Mood: No Mood
|
|
I'm assuming you mean market. If so, I'll also assume you were being sarcastic. If so, I'll also assume you don't know much of economics. If I knew
anything about glassblowing, I'd be hiring a couple blowers to produce all kinds of counterfeit Pyrex glassware.
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
http://www.sciencemadness.org/talk/viewthread.php?tid=22554
Counterfeit Pyrex can be extremely hazardous if used like normal Pyrex.
|
|
Blue Matter
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 107
Registered: 20-6-2013
Location: US
Member Is Offline
Mood: Optimus
|
|
Malford it doesn't seem like you have very much luck on purchasing glassware between this and the bent vigurex column/condenser. I think that the
flask should be fine for boiling non hazardous liquids like stated above I had a beaker with a very small bubble like you did it lasted a while but
eventually created a crack.. so be careful
|
|
plante1999
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
I don't believe that's counterfeit pyrex, the chinese beaker was a "pyrox" brand beaker, a copy of pyrex, but not counterfeit, but Malford flask have
the right logo disposition and type with the correct brand, I can't see but the country of manufacture should be written on pyrex glass.
@Malford, I know enough in economy to tell you glassware is not the best idea of illegal counterfeit because: The market is mostly limited to hobbyist
and researchers, the later buy only from reputable company or directly from the manufacturer, the former is pretty limited in size. If I were to
conterfeit something it would not be glass.
PS: Laughing at typo is far from being a gentleman.
I never asked for this.
|
|
Lambda-Eyde
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 859
Registered: 20-11-2008
Location: Norway
Member Is Offline
Mood: Cleaved
|
|
Quote: Originally posted by plante1999 ![](images/xpblue/lastpost.gif) |
@Malford, I know enough in economy to tell you glassware is not the best idea of illegal counterfeit because: The market is mostly limited to hobbyist
and researchers, the later buy only from reputable company or directly from the manufacturer, the former is pretty limited in size. If I were to
conterfeit something it would not be glass.
PS: Laughing at typo is far from being a gentleman. |
My impression wasn't that he was laughing at your typo. With "marked" you could have meant the markings instead of "market", so it was a legit
concern.
I think counterfeit Pyrex sounds weird too, but it's also weird that there's no item number or country of origin marked on it. It might be custom
made, I don't know if blanks are marked the same way as pre-made glassware. Maybe an e-mail to Corning could shed some light on it?
[Edited on 22-10-2013 by Lambda-Eyde]
This just in: 95,5 % of the world population lives outside the USA
You should really listen to ABBAPlease drop by our IRC channel: #sciencemadness @ irc.efnet.org
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
I have a bunch of glassware that isn't marked, and it seems to work quite well.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
malford
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 116
Registered: 17-6-2013
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by plante1999 ![](images/xpblue/lastpost.gif) | @Malford, I know enough in economy to tell you glassware is not the best idea of illegal counterfeit because: The market is mostly limited to hobbyist
and researchers, the later buy only from reputable company or directly from the manufacturer, the former is pretty limited in size. If I were to
conterfeit something it would not be glass.
PS: Laughing at typo is far from being a gentleman. |
The economics of counterfeiting are that any item which has a retail price supported mostly by its brand often reflected by a simple logo (think Coach
bags, Pyrex), is opportune for counterfeiting because logos are easily reproducible.
Lab equipment is not limited to hobbyists and researchers. There are many for-profit small and medium businesses which use lab equipment and would
like to keep costs low. In fact, I sold some used lab equipment to a small-to-medium business today.
My post was not meant to ridicule you, it was simply a logical argument based on assumptions. You, in fact, were the one attempting to ridicule me
with your sarcasm, but I am not bothered, so have a good day.
---
Blue, I will likely be using it with acids and heat at some point, so your anecdote is disturbing. In that thread about the other crooked glassware I
committed to not purchasing from secondary markets anymore but did anyway
|
|
malford
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 116
Registered: 17-6-2013
Member Is Offline
Mood: No Mood
|
|
![](http://i.imgur.com/2HBOXkdl.jpg)
|
|
bfesser
Resident Wikipedian
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
I wouldn't worry about it. If you're so concerned, throw it in an annealing oven.
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2690
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I have had many flasks with bubbles, both new and repaired, none had any issues with them. And Pyrex mostly marks standard items, many flasks used
to be custom made, and thus had no part number. Now there is much more standardization of glassware than when I started. If there was a repair,
there should be some other marks, like swirls in the glass, or some faint lines of bubbles where there had been a crack or hole. Nowadays, almost no
one repairs glass, as the cost is so high now. But if it was repaired, it would likely have been annealed already, and anyone who repairs glass
normally would know to do that. Few people will try to do that without the right equipment and have any luck.
|
|
jock88
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 505
Registered: 13-12-2012
Member Is Offline
Mood: No Mood
|
|
Be careful if pulling a vacuum on it.
|
|
malford
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 116
Registered: 17-6-2013
Member Is Offline
Mood: No Mood
|
|
That's exactly what I intend to do!
|
|
simba
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 175
Registered: 20-5-2011
Member Is Offline
Mood: No Mood
|
|
I've had many RBFs with small bubbles within the walls and I never had any problem with them. I've done vacuum distillations at 150ºC for many hours
without problems.
|
|
chemrox
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2961
Registered: 18-1-2007
Location: UTM
Member Is Offline
Mood: LaGrangian
|
|
As above, ditto. You could always send it to Corning...
"When you let the dumbasses vote you end up with populism followed by autocracy and getting back is a bitch." Plato (sort of)
|
|