paulr1234
Hazard to Self
Posts: 51
Registered: 30-8-2010
Member Is Offline
Mood: No Mood
|
|
Another homemade fume hood post (with a difference)
I'm thinking about building a fume hood for my office / work area but really don't want an industrial looking hood sitting in my house (truth be told,
I would love one but my wife saw what I was thinking about and wasn't impressed).
I was thinking about the feasibility and safety of buying a large self assembly wardrobe from Ikea or similar, Configuring the interior with the right
baffles, a sliding sash and lining the entire interior work area with something like PPS which is highly solvent, chemical and fire resistant.
http://www.curbellplastics.com/engineering-plastics/pps.html
Only problem with PPS is that it is hella expensive, maybe as much as $700 and up for 2' x 4' sheets.
Anyone have any other ideas for other suitable materials that might not be as $$$. I really like the idea of cabinet with door that I could close and
keep everything tidy and secure but I know that the high density particleboard that this type of furniture is usually made from, will require careful
protection from chemicals, moisture and heat/flame.
|
|
|
hyfalcon
International Hazard
Posts: 1003
Registered: 29-3-2012
Member Is Offline
Mood: No Mood
|
|
What's wrong with HDPE, or am I missing something about that particular material?
|
|
|
cal
Hazard to Self
Posts: 88
Registered: 7-2-2012
Member Is Offline
Mood: No Mood
|
|
Epoxy Paint
The epoxy paints are also good, but the poly plastic sold at Home Depot for bath rooms are quite reasonably priced and also chemical resistant. I use
the stuff where I work in a food processing plant that uses acids and chlorides to cover the walls behind the reactor pots and it works very well. It
has to be cut with a large pair of metal shears or plywood saw blade turned backwards on a circular saw.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
