Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: vacuum filtration
danton
Harmless
*




Posts: 10
Registered: 13-11-2019
Member Is Offline


[*] posted on 16-11-2024 at 02:17
vacuum filtration


I want the ability to perform vacuum filtration but a proper vacuum pump is too expensive right now. I can't use an aspirator on a water tap as my tap water flow rate is much too low. My next thought is a manual vacuum pump for automotive brake bleeding. Something like this:

https://tinyurl.com/3pv23ssc

Has anyone else used one and do they work or is there something i'm missing?

Advice appreciated, thanks
View user's profile View All Posts By User
Precipitates
Hazard to Others
***




Posts: 136
Registered: 4-12-2023
Location: SE Asia
Member Is Offline

Mood: Acid hungry

[*] posted on 16-11-2024 at 02:42


They work - the Explosions&Fire youtuber often uses one to vacuum filter solutions.

Only downside I can see is lots of pumping, and drying precipitates by leaving them on vacuum for 30 mins to an hour or so becomes less practical - unless you want to pump for this duration!
View user's profile View All Posts By User
danton
Harmless
*




Posts: 10
Registered: 13-11-2019
Member Is Offline


[*] posted on 16-11-2024 at 03:55


Quote: Originally posted by Precipitates  

Only downside I can see is lots of pumping, and drying precipitates by leaving them on vacuum for 30 mins to an hour or so becomes less practical - unless you want to pump for this duration!


Thanks, yes good point about drying. Maybe I should try and find a reasonably priced electric automotive pump. The lab models are just too expensive.
View user's profile View All Posts By User
Sulaiman
International Hazard
*****




Posts: 3721
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline


[*] posted on 16-11-2024 at 04:44


Have a look at the pump used by keras here
https://www.sciencemadness.org/whisper/viewthread.php?tid=16...
More than adequate.

(I use even cheaper pumps,
so far....-65kPa is ok, -80kPa is good, -100kPa is bad as it will boil water)




CAUTION : Hobby Chemist, not Professional or even Amateur
View user's profile View All Posts By User
danton
Harmless
*




Posts: 10
Registered: 13-11-2019
Member Is Offline


[*] posted on 16-11-2024 at 12:19


Quote: Originally posted by Sulaiman  
Have a look at the pump used by keras here
https://www.sciencemadness.org/whisper/viewthread.php?tid=16...
More than adequate.

(I use even cheaper pumps,
so far....-65kPa is ok, -80kPa is good, -100kPa is bad as it will boil water)


Thanks, I've found a similar pump online. Brilliant.
View user's profile View All Posts By User
Sulaiman
International Hazard
*****




Posts: 3721
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline


[*] posted on 17-11-2024 at 10:12


I like to put a hose from the outlet of the vacuum pump to somewhere far from me,
this minimises vapours and noise getting to me.




CAUTION : Hobby Chemist, not Professional or even Amateur
View user's profile View All Posts By User

  Go To Top