CouchHatter
Hazard to Others
Posts: 152
Registered: 28-10-2017
Location: Oklahoma
Member Is Offline
Mood: 76 elements taken!
|
|
jacketless condenser
I am designing some apparatus for a microwave reactor and need a condenser without the jacket barbs. I could just buy one and Dremel it off but I
wondered if there were already a piece of glass like this that I don't know of.
I tried to find a comparable piece of borosilicate tubing with a 24/40 joint (although this is not totally necessary) but all the tubes of the proper
diameter are quite short.
Edit: I had read about air condensers when people were distilling sulfuric acid, but I thought that they were calling them that because they were
using air in the jacket instead of water. I didn't realize it was a term for a piece of glassware. Thank you JJay! Ordered.
[Edited on 7-8-2020 by CouchHatter]
|
|
|
JJay
International Hazard
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
An air condenser? https://www.ebay.com/itm/600mm-24-2-9-Air-Condenser-Heat-Exc...
|
|
|
macckone
Dispenser of practical lab wisdom
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
considerably cheaper 24/40
https://www.ebay.com/itm/400mm-24-40-Air-Condenser-Heat-Exch...
|
|
|
Fery
International Hazard
Posts: 1026
Registered: 27-8-2019
Location: Czechoslovakia
Member Is Offline
|
|
I have to suggest that condenser posted by macckone, I owe it and use it. It is sold by nanshinglass, he is my favorite glass supplier, very kind
person, he sends items very quickly, good quality and good prices.
|
|
|
Fyndium
International Hazard
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
You can stack multiple smaller columns. The price jumps up very quickly with length, and there is also an additional risk of breaking the glass during
shipping.
|
|
|
Dr.Bob
International Hazard
Posts: 2753
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: Mildly disgruntled scientist
|
|
Can you just use a vigreux column or a simple 24/40 extension tube, or do you want an insulated section with the condenser type jacket, just sealed?
I have a few simple 24/40 extension tubes, with one each male and female joint? I also think I have a column or two for distillations that have a
sealed jacket but no hose barbs? Are you using a CEM microwave for open heating? I also have a few rb flasks with long necks, if that helps.
|
|
|
CouchHatter
Hazard to Others
Posts: 152
Registered: 28-10-2017
Location: Oklahoma
Member Is Offline
Mood: 76 elements taken!
|
|
I actually spent about $15 on a 200mm from Chemglass. I did think of a vigreux, but I don't own one and just assumed that an air condenser would be
more versatile/disposable if my experiment deforms it. Why would someone use a vigreux over a packed column for fractional distillation? I already own
a fractioning column. A jacketed column without barbs would certainly be an improvement though. Let me know what you'd part with it for, Dr. Bob.
I'm using a GE consumer microwave to convert phosphoric acid to phosphorus per US Patent No. US6207024 . I'm pushing the limits of boro, the reaction
requiring a minimum of 600C to occur. I will try it, and upon its potential failure switch to a ceramic reaction vessel.
Also the drawing is a very rough one, I won't really use 8-inch copper pipe and a tin can. I'll have proper guards in place for the escape of the
microwaves. This image is just to get an idea of the logistics. Also there are aspects of the patent that I do not have the capability to replicate,
such as the microwave tuner ($$$). Maybe it will be a complete waste of time, who knows!
Attachment: US6207024 phosphoric acid purification.pdf (342kB)
This file has been downloaded 279 times
|
|
|
Brightthermite
Hazard to Others
Posts: 133
Registered: 26-6-2019
Member Is Offline
|
|
Can you link where you found the piece on Chemglass? The only one I find was $70.
|
|
|
CouchHatter
Hazard to Others
Posts: 152
Registered: 28-10-2017
Location: Oklahoma
Member Is Offline
Mood: 76 elements taken!
|
|
Sorry, I meant deschem. Friday was a long day for me.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
