Terran
Harmless
Posts: 6
Registered: 20-6-2019
Member Is Offline
|
|
Filling old gas canisters
Luck has blessed me with two full canisters of oxygen and a full canister of nitrous. Does anyone here know about a system for refilling these
canisters with other gasses produced in the lab? Chlorine, hydrogen, ect.
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3647
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Online
|
|
Both oxygen and nitrous are oxidisers,
so you would need to use a vacuum pump to evacuate a cylinder before introducing hydrogen.
Chlorine plus a tiny ammount of moisture will eat most metals.
Overall I recommend not bottling either hydrogen or chlorine but either
buy your gasses ready bottled
or
produce your required gasses on demand ... much safer
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Furthermore, hydrogen will cause metal embrittlement, so hydrogen canisters have to be specially designed for hydrogen. It is quite unsafe to put
hydrogen in a canister not designed for it.
|
|
Terran
Harmless
Posts: 6
Registered: 20-6-2019
Member Is Offline
|
|
Thank you for the information
Understand the theory before attempting the praxis.
|
|
RogueRose
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1590
Registered: 16-6-2014
Member Is Offline
|
|
Maybe you could purge the cannisters with CO2, N2 or argon, not to a high pressure, just enough to ensure there is no oxidizer left in the bottle.
I've heard of people doing something similar with water as well, like in propane tanks but IDK how you would get all the moisture and air out of it
afterwards, maybe heat it with the valve open, but you'd still have to get the air out afterwards.
|
|
Ubya
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
Quote: Originally posted by RogueRose ![](images/xpblue/lastpost.gif) | Maybe you could purge the cannisters with CO2, N2 or argon, not to a high pressure, just enough to ensure there is no oxidizer left in the bottle.
I've heard of people doing something similar with water as well, like in propane tanks but IDK how you would get all the moisture and air out of it
afterwards, maybe heat it with the valve open, but you'd still have to get the air out afterwards. |
Vacuum pump, instead of purging with an inert gas and then purging again with your gas pump down the cylinder, fill it with your gas, vacuum it again,
add your gas now (you need to get to the lowest possible pressure or cycle vacuum/filling more times)
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1640
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Metacelsus ![](images/xpblue/lastpost.gif) | Furthermore, hydrogen will cause metal embrittlement, so hydrogen canisters have to be specially designed for hydrogen. It is quite unsafe to put
hydrogen in a canister not designed for it. |
you all so need a heat component, the worst issue is diffusion through the metal.
|
|
Terran
Harmless
Posts: 6
Registered: 20-6-2019
Member Is Offline
|
|
Quote: Originally posted by Ubya ![](images/xpblue/lastpost.gif) | Quote: Originally posted by RogueRose ![](images/xpblue/lastpost.gif) | Maybe you could purge the cannisters with CO2, N2 or argon, not to a high pressure, just enough to ensure there is no oxidizer left in the bottle.
I've heard of people doing something similar with water as well, like in propane tanks but IDK how you would get all the moisture and air out of it
afterwards, maybe heat it with the valve open, but you'd still have to get the air out afterwards. |
Vacuum pump, instead of purging with an inert gas and then purging again with your gas pump down the cylinder, fill it with your gas, vacuum it again,
add your gas now (you need to get to the lowest possible pressure or cycle vacuum/filling more times) |
So it would be empty canister, vacuum remainder out, then vacuum gas in. Correct?
Understand the theory before attempting the praxis.
|
|
Ubya
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
Quote: Originally posted by Terran ![](images/xpblue/lastpost.gif) | Quote: Originally posted by Ubya ![](images/xpblue/lastpost.gif) | Quote: Originally posted by RogueRose ![](images/xpblue/lastpost.gif) | Maybe you could purge the cannisters with CO2, N2 or argon, not to a high pressure, just enough to ensure there is no oxidizer left in the bottle.
I've heard of people doing something similar with water as well, like in propane tanks but IDK how you would get all the moisture and air out of it
afterwards, maybe heat it with the valve open, but you'd still have to get the air out afterwards. |
Vacuum pump, instead of purging with an inert gas and then purging again with your gas pump down the cylinder, fill it with your gas, vacuum it again,
add your gas now (you need to get to the lowest possible pressure or cycle vacuum/filling more times) |
So it would be empty canister, vacuum remainder out, then vacuum gas in. Correct? |
Empty canister, vacuum it, fill it with your gas (atmospheric pressure or less), vacuum it again, fill it to the desired pressure
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
You may have missed out one or more steps there.
If the container has air in it then you evacuate it, then fill it with something "inert" (N2 or CO2 or Ar...) then evacuate it again before adding
anything flammable.
Similarly, if you go from a flammable material to an oxidant you fill it with something inert in between.
If youare unlucky...
Empty canister.
Connect to vacuum pump
Discover vac pump isn't suitable for flammable gas.
Extinguish fire.
Learn that you aren't meant to refill disposable gas bottles.
|
|
Ubya
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
Quote: Originally posted by unionised ![](images/xpblue/lastpost.gif) | You may have missed out one or more steps there.
If the container has air in it then you evacuate it, then fill it with something "inert" (N2 or CO2 or Ar...) then evacuate it again before adding
anything flammable.
Similarly, if you go from a flammable material to an oxidant you fill it with something inert in between.
|
the purging with an inert gas is necessary if you have a crappy vacuum pump, if you get thr canister to 1 torr (pretty reasonable) the percentage of
air after filling the canister with gas is already 1/760, repeating the process one more time and the air is pretty much non existent, but yea if the
vacuum pump can get only to 20kPa, inert gas purging is mandatory
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
The big problem is the gas mixture you make in the pump.
It starts off full of air, and then you add some flammable gas...
(or vice versa)
|
|
Ubya
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
Quote: Originally posted by unionised ![](images/xpblue/lastpost.gif) | The big problem is the gas mixture you make in the pump.
It starts off full of air, and then you add some flammable gas...
(or vice versa) |
rotary vane vacuum pumps are commonly used in HVAC applications, where refrigerants can be flammable gases (r600a, r290 etc) so they must be safe
[Edited on 26-6-2019 by Ubya]
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
j_sum1
|
Thread Moved 26-6-2019 at 14:19 |
Terran
Harmless
Posts: 6
Registered: 20-6-2019
Member Is Offline
|
|
Thank you all, you've all been great
Understand the theory before attempting the praxis.
|
|