1281371269
Hazard to Others
Posts: 312
Registered: 15-5-2009
Member Is Offline
|
|
Chemical Resistance of Plastics
I found this link - it's a very well presented datasheet of the chemical resistivity of common plastics. It's the kind of thing that could be useful
to print off and put on the lab wall.
http://chiron.no/pdf/Chemical_Resistance_of_Plastics.pdf
Can anyone comment on the accuracy?
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
Damien Hirst on Meth?
Wrong question, sorry. . .
Its accuracy looks good!
Use teflon!
[Edited on 9-11-2009 by hissingnoise]
|
|
|
1281371269
Hazard to Others
Posts: 312
Registered: 15-5-2009
Member Is Offline
|
|
It gives every name for Teflon (FEP / TFE / PFA) apart from PTFE which is the one most widely used. Strange.
[Edited on 9-11-2009 by Mossydie]
|
|
|
Lambda-Eyde
National Hazard
Posts: 860
Registered: 20-11-2008
Location: Norway
Member Is Offline
Mood: Cleaved
|
|
Chiron is a well-reputed chemical company located in Norway, not far from where I live. I believe they have done their homework.
Attached is a pdf listing the chemical resistance of PP (polypropylene). It's a very long and detailed list, and I find it extremely useful when
determining whether I should use blue or red caps for my Simax reagent bottles!
Attachment: Resistance of Polypropylene.pdf (228kB)
This file has been downloaded 848 times
Edit: Seems like the pdf is from Ace glass, but that only makes it more reliable, doesn't it? 
[Edited on 9-11-2009 by Lambda-Eyde]
|
|
|
Formatik
National Hazard
Posts: 927
Registered: 25-3-2008
Member Is Offline
Mood: equilibrium
|
|
Here's another thread on this: http://www.sciencemadness.org/whisper/viewthread.php?tid=118...
To comment on accuracy, I wouldn't trust the generalized charts as much as those which are more specific, for example, in that chart for the HDPE
under "Acids strong and conc.", HDPE will not hold up to acids like red fuming HNO3, oleum, or chlorosulfonic acid. Even though there is a general
compatability stated, it will get attacked. But even with more specific charts, it's best to check multiple tables. You can also find charts which are
more specialized in the single plastic you are looking at.
|
|
|
S.C. Wack
bibliomaster
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
http://www.nibco.com/assets/ChemGuide.pdf
|
|
|
starman
Hazard to Others
Posts: 318
Registered: 5-7-2008
Location: Western Australia
Member Is Offline
Mood: No Mood
|
|
It does state in the key beneath the chart "not for oxidising acids" such as HNO3 you mentioned.Clear enough that one should seek clarification as to
compatibility of an indivdual acid.Accurate enough IMO.
Chemistry- The journey from the end of physics to the beginning of life.(starman)
|
|
|
merrlin
Hazard to Others
Posts: 110
Registered: 3-4-2009
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Mossydie  | It gives every name for Teflon (FEP / TFE / PFA) apart from PTFE which is the one most widely used. Strange.
[Edited on 9-11-2009 by Mossydie] |
Teflon is a trade name that has achieved generic use and although it is usually used in association with PTFE, it doesn't refer to a specific
compound. Attached is some information on various fluoropolymers. I have seen disagreements between chemical compatiblilty charts that I have found
on the web, so you may want to confirm compatibility by multiple sources. Compatibility itself is not always well defined. Some polymers may not be
attacked by certain compounds but have a high enough absorption or permeability to cause problems. For example, PTFE has a permeability to helium that
is about 1000 times greater than that of nylon. This typically isn't a problem unless you are trying to helium leak check a high vacuum system with
PTFE seals.
Attachment: Pages from Technology of Fluoropolymers.pdf (457kB)
This file has been downloaded 3485 times
|
|
|
Formatik
National Hazard
Posts: 927
Registered: 25-3-2008
Member Is Offline
Mood: equilibrium
|
|
That comment was aimed at Mossydie's chart, where nothing there warns of oxidizing acids. According to a few charts, HDPE can take up to 30%
concentration HNO3 with a "satisfactory" rating.
|
|
|
Lambda-Eyde
National Hazard
Posts: 860
Registered: 20-11-2008
Location: Norway
Member Is Offline
Mood: Cleaved
|
|
| Quote: Originally posted by Formatik |
That comment was aimed at Mossydie's chart, where nothing there warns of oxidizing acids. According to a few charts, HDPE can take up to 30%
concentration HNO3 with a "satisfactory" rating.
|
I have seen 70 % HNO3 supplied in HDPE bottles, which leads me to believe the rating should be higher than "satisfactory"...
[Edited on 10-11-2009 by Lambda-Eyde]
|
|
|
Picric-A
National Hazard
Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline
Mood: Fuming
|
|
All the conc (70%) nitric i buy is in HDPE bottles...
They are stained yellow however i see no furthur deteriation (sp?) than that...
the has stayed good for 2 yrs now and counting.
|
|
|
1281371269
Hazard to Others
Posts: 312
Registered: 15-5-2009
Member Is Offline
|
|
HDPE supposedly becomes brittle after long storage - but I have some 70% that was supplied in a black HDPE bottle and it's fine.
|
|
|
Formatik
National Hazard
Posts: 927
Registered: 25-3-2008
Member Is Offline
Mood: equilibrium
|
|
Many charts I've seen indicate conc. HNO3 isn't recommended with HDPE, e.g.: Calpac lab link above gives this for 70% HNO3: "HDPE and LDPE at 20C°
show some effect after 7 days. Both at 50C° show immediate damage and are not recommended."
But I personally don't trust conc. nitric in any plastic beyond teflon, a glass bottle of commercial 54% I have has a plastic cap, the acid is several
years old (at least about 6 to 8) and the cap already shows signs of some attack. In the long term, I would rather be safe than sorry, even though I
favor plastic.
|
|
|
smuv
National Hazard
Posts: 842
Registered: 2-5-2007
Member Is Offline
Mood: Jingoistic
|
|
I have seen very high purity 70% nitric acid provided from chem suppliers in nalgene bottles. When the bottle was empty I took it and am now storing
>>70% nitric acid in it; 9 months and no issues. The plastic is clear/colorless with no yellowing.
"Titanium tetrachloride…You sly temptress." --Walter Bishop
|
|
|
lucky123
Harmless
Posts: 39
Registered: 5-3-2008
Member Is Offline
Mood: No Mood
|
|
I was wondering any plastics suitable for ethonal stills? Particularly pvc, cpvc, hdpe and pp irrigation pipe, ldpe tubing, upvc and pex pipe and
pvdf tubing? I hear yes and no depending where you look so anyone know for sure which are best especially for making a fractional coulum where strong
vapors will be at 95+ ethanol...
|
|
|
Lambda-Eyde
National Hazard
Posts: 860
Registered: 20-11-2008
Location: Norway
Member Is Offline
Mood: Cleaved
|
|
| Quote: Originally posted by Mossydie | | HDPE supposedly becomes brittle after long storage - but I have some 70% that was supplied in a black HDPE bottle and it's fine.
|
HDPE does become brittle after years of exposure to sunlight. All my Merck agar boxes have the words "ACHTUNG: Licht macht kunststoff sprödel" on
them! 
I have also witnessed this in our school lab, where all the relatively "un-harmful" chemicals are kept in a cupboard with a glass window. I was taking
a box of manganese dioxide out from the cupboard and the lid just crumbled into pieces as I tried to open it!
So keep HDPE boxes/bottles out of sunlight, people!
|
|
|
Panache
International Hazard
Posts: 1290
Registered: 18-10-2007
Member Is Offline
Mood: Instead of being my deliverance, she had a resemblance to a Kat named Frankenstein
|
|
| Quote: Originally posted by merrlin | | Quote: Originally posted by Mossydie | It gives every name for Teflon (FEP / TFE / PFA) apart from PTFE which is the one most widely used. Strange.
[Edited on 9-11-2009 by Mossydie] |
For example, PTFE has a permeability to helium that is about 1000 times greater than that of nylon. This typically isn't a problem unless you are
trying to helium leak check a high vacuum system with PTFE seals.
|
Ha! I love stories like this, how long did you spend looking for the non-existent leak? Was the entire thing dismantled and reassembled?
|
|
|
JohnWW
International Hazard
Posts: 2849
Registered: 27-7-2004
Location: New Zealand
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Mossydie | | HDPE supposedly becomes brittle after long storage - but I have some 70% that was supplied in a black HDPE bottle and it's fine.
|
Black HDPE contains finely-divided graphite (lampblack), which absorbs all wavelengths of light, including
well into the UV and IR. It ensures that UV light, which soon causes translucent polyethylene to become brittle and crumble, does not penetrate more
than a few microns into the surface. This is why graphite-filled black polyethylene is used for irrigation pipes, black plastic sheeting, and black
plastic water collection tanks.
|
|
|
merrlin
Hazard to Others
Posts: 110
Registered: 3-4-2009
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Panache | | Quote: Originally posted by merrlin | | Quote: Originally posted by Mossydie | It gives every name for Teflon (FEP / TFE / PFA) apart from PTFE which is the one most widely used. Strange.
[Edited on 9-11-2009 by Mossydie] |
For example, PTFE has a permeability to helium that is about 1000 times greater than that of nylon. This typically isn't a problem unless you are
trying to helium leak check a high vacuum system with PTFE seals.
|
Ha! I love stories like this, how long did you spend looking for the non-existent leak? Was the entire thing dismantled and reassembled?
|
In this instance was fortunate to have been warned about the teflon/helium anomaly before having the opportunity to learn by experience.
|
|
|
lucky123
Harmless
Posts: 39
Registered: 5-3-2008
Member Is Offline
Mood: No Mood
|
|
So the black hdpe pipe would be a good choice I take it and what about cpvc and pex pipe? I hear pex pipe due to the crosslinkage increases chemical
resistance and temperature ratings. And from an earlier post above rigid pvc pipe (grey pipe at harware store) would work. So what is this talk
about plasticizers and people having them leeched into their spirits? What plastics would cause this problem???
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
