hexanes (mixed isomers) comes to mind...franklyn - 10-7-2006 at 13:54
Trichloroethane is the industry standard electronics degreaser
U P D A T E
1,1,1-trichloroethane (TCE). 1,1,1-trichloroethane is one of the least toxic of
the chlorinated hydrocarbons. The major use of TCE is as a degreasing solvent
in the metal and electronic industry. Commercially, TCE is found in dry cleaning
agents, refrigerants, fumigants, paint thinners, lacquers, varnishes, tars,
rubber solvents, inks and glues. Household products that may contain TCE
include spot-removers, rug-cleaning agents and typewriter correction fluids.
TCE was formerly used as an inhalational anesthetic agent but, due to its toxic
effects, has been replaced by safer agents.
[Edited on 12-7-2006 by franklyn]12AX7 - 10-7-2006 at 16:02
Cuts through solder rosin, too.
Shame you can't get it anymore.
For general dustiness I wouldn't recommend anything more than alcohol, you never know what could be damaged with strong solvents.
TimIrC - 10-7-2006 at 16:43
Hexane is the one you want, made under the name "Blow Off" contact cleaner, hard to find. They also make a can of air that looks identical with the
same name however stupid that is so you have to look carefully at the fine print to be sure it is the hexane. To get it here I had to have my
favorite hardware store get it in for me, they order a case and I buy half of it per year (6 cans). Of course this is for potentiometers, for any kind
of switches you need a lubricating cleaner.azaleaemerson - 11-7-2006 at 04:33
Believe it or not, hexane is now considered carcenogenic. The product "undo" or "oops" is mostly heptane I think, and it's used to remove adhesive.
I use it for lots of things and it dries clean and fast.
Azfranklyn - 8-9-2006 at 11:57
Quote:
Originally posted by 12AX7
Cuts through solder rosin , too . Shame you can't get it anymore.
Quote:
Originally posted by franklyn
Trichloroethane is the industry standard electronics degreaser
It
's not available at retail as it once was.
I just recently bought some napha from a local hardware store I frequent,
I saw they had three - gallon and a half - cans of trichloroethane at $18 apeice.
Judging from the rough dull patina of the cans they've been there a while.
.Eclectic - 8-9-2006 at 13:01
99% isopropanol works great as an electronics board cleaner.
The 70% rubbing alcohol is a good prerinse for coffee and soft drink spill cleanup, followed by the 99% as a drier.
The top of the line low tox/low flammibility cleaner used to be 50% isopropanol/50% trichlorotrifluoroethane (freon113).
These won't attack plastic parts. The other chlorinated solvents will.
[Edited on 8-9-2006 by Eclectic]Twospoons - 8-9-2006 at 21:09
Electrolube have a product called FLU (for some reason all their products have 3 letter names). Its intended as a flux remover, but I've found to be
great for cleaning all sorts of muck off all sorts of things. And it has that lovely 'orange' smell.
