anoopai - 6-6-2012 at 20:16
which is the best method for plating silver over copper ?
cyanureeves - 7-6-2012 at 16:37
the safest way is to make solution of silver chloride, potassiumferrocyanide and boil together with sodium carbonate using a silver anode.i got this
formula from a fellow named Goran Budija at finishing.com
anoopai - 7-6-2012 at 20:45
Is this a electroless plating ?, silver anode means just a piece of silver into the solution ?
cyanureeves - 8-6-2012 at 15:07
negative this is not electroless plating and yes silver anode means a piece of pure silver as anode(pos).but goran says stainless steel can also be
used for anode. this solution can be used with almost any low voltage and works pretty good.
Mitchell - 2-8-2013 at 23:21
I have been looking all over the internet on electroplating silver without the use of AgCN and finally found a recipe. I will be sure to give this a
shot and report my findings. But one quick question what solvent would be used to dissolve silver chloride.
cyanureeves - 3-8-2013 at 20:02
i think ammonium hydroxide dissolves silver chloride.