| Search |
| [Next Page] |
Thoughts On Anodes
Another interesting read. They have the batch process down pretty nicely, considering it was 1942.
... |
16-1-2010 at 08:29
by: Swede |
Thoughts On Anodes
Until I get my LD plating rig set back up, I can't help with the nitrite issue. The used liquor fro ... |
15-1-2010 at 07:26
by: Swede |
Thoughts On Anodes
Have you tried peroxide yet? Or how about bubbling ozonated air? There are a number of fairly inex ... |
14-1-2010 at 07:22
by: Swede |
Thoughts On Anodes
[rquote=169438&tid=5050&author=12AX7]Won't that diffusion tube tend to hold a higher concent ... |
12-1-2010 at 09:21
by: Swede |
Anyone good at glass work?
Great stuff, thanks! It's obvious that the masters have decades of experience, but it would be nice ... |
11-1-2010 at 09:47
by: Swede |
Thoughts On Anodes
Thanks Bikemaster. The plan for this thing uses an injector fitting with a length of PTFE tube (may ... |
11-1-2010 at 09:42
by: Swede |
Anyone good at glass work?
Wow, thanks for the fast replies. I would never have guessed that working with glass presented a si ... |
7-1-2010 at 14:17
by: Swede |
Aqua regia dangers
[rquote=169078&tid=13225&author=mnick12]Thanks swede,
I also don't think that I am going to ... |
7-1-2010 at 14:11
by: Swede |
Anyone good at glass work?
I have always been fascinated by the skill of the glass apparatus artists who can start with raw gla ... |
7-1-2010 at 07:59
by: Swede |
Aqua regia dangers
If pursuing it for the fun and knowledge, excellent, but I don't know how much Au you are going to r ... |
7-1-2010 at 07:49
by: Swede |
Thoughts On Anodes
Some experiments with a drip (gravity fed) HCl system...
We have discussed this in some detail in ... |
6-1-2010 at 13:14
by: Swede |
Bonding PTFE
It sounds like re-engineering, rather than bonding, is a better answer. I use PTFE mostly as long-l ... |
3-1-2010 at 08:16
by: Swede |
Bonding PTFE
There are "kits" available from companies like U.S. Plastics that supposedly bond PTFE sheet and sol ... |
30-12-2009 at 10:03
by: Swede |
Medical Laser
eBay is LOADED with laser "accessories", including safety goggles, focusing devices, power meters, e ... |
30-12-2009 at 09:38
by: Swede |
Ebonex Electrode
Those Hosers in the UK didn't even bother answering my email. 
I'm not looking for FREE Ebo ... |
22-12-2009 at 08:00
by: Swede |
Thoughts On Anodes
Hi Xenoid - I may be using the term bipolar incorrectly, and definitely using the term AC incorrectl ... |
21-12-2009 at 10:31
by: Swede |
Thoughts On Anodes
Nice find! Xenoid, if the crack you mention is simply from the bolt hole to the periphery, I doubt ... |
20-12-2009 at 09:20
by: Swede |
Commercial chemical analysis services
Interestingly, I did have one reply via email, and they wanted $315 to analyze a perchlorate sample ... |
20-12-2009 at 09:10
by: Swede |
First LD Anode use
^^ that is an excellent paper for anyone into plating LD. My LD crystals under the microscope looke ... |
19-12-2009 at 08:09
by: Swede |
First LD Anode use
The plating bath was within 2 degrees C the entire time.
The grain size was more of an oddity tha ... |
18-12-2009 at 06:40
by: Swede |
Commercial chemical analysis services
I know I should probably not be lazy and just dig in and do it, but I was hoping a commercial lab co ... |
17-12-2009 at 14:39
by: Swede |
First LD Anode use
I carefully cleaved one of the LD warts along a line that would display the LD crystal growth from b ... |
17-12-2009 at 10:34
by: Swede |
Commercial chemical analysis services
Has anyone made use of commercial services to test the purity and/or contaminants of a chemical prod ... |
17-12-2009 at 09:31
by: Swede |
Ebonex Electrode
This is an ancient, necropostic thread, but it is the only eboxex hit on SMDB. I have been in conta ... |
16-12-2009 at 10:40
by: Swede |
MOT supply for electrolysis
[rquote=167392&tid=12312&author=dann2]Hello,
There is still an [url=http://cgi.ebay.co.u ... |
16-12-2009 at 07:18
by: Swede |
| [Next Page] |
