| Search |
| [Next Page] |
lens liner
It should be observed tolerance. For further experiments I recommend 20 mm diameter and 1 mm thick s ... |
29-12-2014 at 04:40
by: Laboratory of Liptakov |
US 3 217 647
Patent from Thomanek US 3 217 647
It is very interesting. He says something else. Liner thick 5% f ... |
28-12-2014 at 14:30
by: Laboratory of Liptakov |
EFP
Liner 2.5 fat? 28mm diameter? This is wrong. Thickness should be 28,5x 0.0146 = 0.41 mm thick Cu lin ... |
28-12-2014 at 10:00
by: Laboratory of Liptakov |
propellant
0,1% maybe acetone from procedure. For the function of propellant it is of little importance. But th ... |
28-12-2014 at 01:34
by: Laboratory of Liptakov |
pit
My opinion, I prefer a bit more. Maybe 80 cm. Still, it must be in the sand. Or in the snow. Snow is ... |
27-12-2014 at 15:00
by: Laboratory of Liptakov |
plate
This is it, what I wrote. When the diameter 1.8 cm, will cause strong nuclear forces and constraints ... |
27-12-2014 at 10:53
by: Laboratory of Liptakov |
methode LL
Here I would like to bring my experience. Rule No.1)
The temperature of all components not exceed + ... |
27-12-2014 at 10:11
by: Laboratory of Liptakov |
counterweight
It occurred to me to use less plasticizer. Around 5-10% only. For ETN (PETN) can be pressed. In the ... |
26-12-2014 at 11:38
by: Laboratory of Liptakov |
Cu tube
Interesting idea, option. But: the shock wave has tremendous power. At a distance of 30 cm fractured ... |
26-12-2014 at 05:55
by: Laboratory of Liptakov |
perfect
Again a very good job Hennig. The best I've ever seen. Vladimir writes important thing. 10 cm distan ... |
26-12-2014 at 01:26
by: Laboratory of Liptakov |
Christmas
Christmas
[file]36092[/file] |
23-12-2014 at 04:35
by: Laboratory of Liptakov |
nice work
OK results are important and these are at the top. Tetrolite granules cast and are less sensitive th ... |
21-12-2014 at 15:34
by: Laboratory of Liptakov |
shock tube
If it is an unknown composition always equivalent No.8. Thus as 0.5 to 0.7 g ETN. However. It is onl ... |
21-12-2014 at 10:50
by: Laboratory of Liptakov |
hammer
I have this idea. Why use a plumb line? Motion in the picture. Replaceable paper tube. Small window ... |
20-12-2014 at 14:33
by: Laboratory of Liptakov |
test MEKP
I just study MEKP a thread here: http: //www.sciencemadness.org/talk/viewthread.php? Tid = 20 & ... |
14-12-2014 at 11:33
by: Laboratory of Liptakov |
AP plastic
Here is another example. It is interesting excluded elemental copper. It comes from TeACP. The compo ... |
14-12-2014 at 07:38
by: Laboratory of Liptakov |
Sergeant James
I got a message from Sergeant James. It's a really tough guy... ...LL
[file]35816[/file] |
13-12-2014 at 07:27
by: Laboratory of Liptakov |
plastic
Hi,
ammonium perchlorate for plastic - mesh - sieve about 0,1 - 0,2 mm. Tested primary initiation, ... |
11-12-2014 at 14:39
by: Laboratory of Liptakov |
TACN sensitivity?
Hmm ... Interesting. But: Use concentrated HNO3 for production TACN? It is in my opinion a shame. ... |
11-12-2014 at 07:44
by: Laboratory of Liptakov |
KClO3
Do you try to ratio saccharose 25,2 and KClO3 74,8%. Oxygene balanced is +0,052. OB saccharose = - 1 ... |
11-12-2014 at 06:25
by: Laboratory of Liptakov |
Moai
For those of you who like to tear and split wood. Laboratory of Liptakov developed a plastic explosi ... |
9-12-2014 at 11:34
by: Laboratory of Liptakov |
Holes
This is a pretty good method. Test friction. And the results are good. Sensitivity is low.
I also h ... |
8-12-2014 at 10:12
by: Laboratory of Liptakov |
Pseudo-Pentolite via ETN and TNT?
[Edited on 8-12-2014 by Laboratory of Liptakov] |
8-12-2014 at 09:58
by: Laboratory of Liptakov |
thickness
This is the hole from one gram tetrolyte? It is labeled correctly? What is the thickness of steel? ... |
7-12-2014 at 02:22
by: Laboratory of Liptakov |
Polyvinyl nitrate
Good work markx. We're only a small step from perfect plasticizer. And that's not all. Polyvinyl nit ... |
6-12-2014 at 07:12
by: Laboratory of Liptakov |
| [Next Page] |
