| Search |
| [Next Page] |
Short question / quick answer - Thread
Where I live I can get very powerful firecrackers that are two inches long and half an inch thick (l ... |
17-5-2014 at 14:44
by: TheAlchemistPirate |
Short question / quick answer - Thread
I recently have been exploring HEs and the chemistry behind them, but have run into a problem. Basic ... |
17-5-2014 at 14:28
by: TheAlchemistPirate |
Short question / quick answer - Thread
[rquote=331304&tid=26572&author=NexusDNA]I have a question! It's actually reagent acquisitio ... |
14-5-2014 at 13:17
by: TheAlchemistPirate |
Short question / quick answer - Thread
I have seen many topics on this site and other ones about explosive "casting" , and after looking it ... |
14-5-2014 at 11:50
by: TheAlchemistPirate |
Short question / quick answer - Thread
I got it to crystallize, as markx said I used way too much water. I am going to be making etn tonigh ... |
10-5-2014 at 11:30
by: TheAlchemistPirate |
Short question / quick answer - Thread
I just tried making pure erythritol crystals with Truvia sugar substitute, but it isn't crystallizin ... |
8-5-2014 at 18:53
by: TheAlchemistPirate |
Short question / quick answer - Thread
Hey I have questions regarding ETN too, as you might see above I'm trying to make it.
I recently bo ... |
8-5-2014 at 14:19
by: TheAlchemistPirate |
Short question / quick answer - Thread
I was recently considering making ETN, and have been planning what chemicals to get, the exact proce ... |
5-5-2014 at 15:00
by: TheAlchemistPirate |
Short question / quick answer - Thread
So would I be able to pass the air slowly through a horizontal glass tube filled with dehydrated Eps ... |
29-4-2014 at 17:47
by: TheAlchemistPirate |
Short question / quick answer - Thread
Has anyone here built an air bubbler with a drying system? I am planning to purify my nitric acid by ... |
29-4-2014 at 12:53
by: TheAlchemistPirate |
Short question / quick answer - Thread
Hey guys I have lately been having troubles with distilling nitric acid, and was wondering if an oil ... |
16-4-2014 at 10:51
by: TheAlchemistPirate |
Bad days in the lab or with glassware?
Well recently I managed to freeze a glass stopper in my two-necked round bottom flask by leaving an ... |
8-4-2014 at 09:11
by: TheAlchemistPirate |
RDX synthesis
That's what happened to me too, neonpulse. I just put the spray WD-40 on the the flask, I also tried ... |
5-4-2014 at 17:38
by: TheAlchemistPirate |
RDX synthesis
I used an industrial (supposedly high strength) cleaner called purple power.If this doesn't work I w ... |
5-4-2014 at 16:01
by: TheAlchemistPirate |
RDX synthesis
Ok, Im now soaking it in a high-power grease remover. I made sure to check this thread before I trie ... |
5-4-2014 at 12:56
by: TheAlchemistPirate |
Short question / quick answer - Thread
Isn't this an atomic bomb?! Or am I just an idiot? |
4-4-2014 at 19:46
by: TheAlchemistPirate |
RDX synthesis
I am heating the flask in boiling water right now, I will take it out in a few minutes. That link do ... |
4-4-2014 at 16:56
by: TheAlchemistPirate |
RDX synthesis
I thought that distilling the KNO3 and the H2SO4 would be better than simply adding the two chemical ... |
4-4-2014 at 13:21
by: TheAlchemistPirate |
RDX synthesis
Oh, I didn't know that I had to cool it. I never saw a tutorial mentioning that, and I have research ... |
3-4-2014 at 18:46
by: TheAlchemistPirate |
RDX synthesis
I mean preheat it to a low temperature at first then after I pour it in, raise the temperature. |
3-4-2014 at 18:30
by: TheAlchemistPirate |
RDX synthesis
Doesn't it make nitric acid when not heated? What if I preheated it to a lower temperature? One not ... |
3-4-2014 at 17:55
by: TheAlchemistPirate |
RDX synthesis
Earlier today I attempted to make nitric acid by nitrate salt and sulfuric acid distillation, but u ... |
3-4-2014 at 17:16
by: TheAlchemistPirate |
Short question / quick answer - Thread
Hello I am making HNO3 by distilling H2SO4 and KNO3(no vacuum) and I have no idea what the best temp ... |
1-4-2014 at 13:10
by: TheAlchemistPirate |
KNO3 Fertilizer
This is a lot of work for a chemical so easily obtained, If I were you I would just use spectracide ... |
31-3-2014 at 18:55
by: TheAlchemistPirate |
RDX synthesis
This guy already showed a way.[rquote=3064&tid=250&author=lucifer]I’ve made rdx with dist ... |
31-3-2014 at 17:21
by: TheAlchemistPirate |
| [Next Page] |
