| Search |
| [Next Page] |
confirmed
The assumption idea marginal edge was confirmed. The backing plate is not important. Mechanical or a ... |
13-1-2015 at 01:04
by: Laboratory of Liptakov |
edge
Well, Henning, In the scheme of these PDF attachments can be seen clearly saving liner. The liner is ... |
12-1-2015 at 12:24
by: Laboratory of Liptakov |
pressing
This is a misunderstanding. The scheme is modified, changed. After the molding process should liner ... |
12-1-2015 at 05:34
by: Laboratory of Liptakov |
floating liner
Here I want to do one more thought. Only one liner functioned flawlessly, perfect. And when it shot ... |
11-1-2015 at 13:13
by: Laboratory of Liptakov |
steel 12
Yes, slow plastic explosive is described in the thread cheddite, pag. 7, title AP plastic. Squares o ... |
11-1-2015 at 02:50
by: Laboratory of Liptakov |
smart container
Using polystyrene container is very easy. Production takes 20 minutes. The entire device buries itse ... |
10-1-2015 at 15:29
by: Laboratory of Liptakov |
armor
Amateur human mind is difficult to understand how this is possible. A piece of soft copper pierces t ... |
8-1-2015 at 15:11
by: Laboratory of Liptakov |
cone 84
For deep penetration cumulative effect better is VoD + 6000 m/s. For EFP + 7000 m/s. (for quality e ... |
8-1-2015 at 14:38
by: Laboratory of Liptakov |
gold sands
Henning, I know how attached the target. It is in the figures, the photo. If the target is large and ... |
8-1-2015 at 07:55
by: Laboratory of Liptakov |
God with you
Infospunge: If you are aged 70 years and you bored with life, keep research TATP. If you're young, y ... |
7-1-2015 at 15:00
by: Laboratory of Liptakov |
packaging
Well! It looks good. I see that a lot of copper is annealed. That is good. I made a few more unsucce ... |
5-1-2015 at 11:45
by: Laboratory of Liptakov |
capturing
If I had the opportunity to shoot freely, open space, I will shoot at 70 cm. For dia. 20-25 mm. Bert ... |
5-1-2015 at 02:25
by: Laboratory of Liptakov |
12mm
Blade diameter 22.3 (x0,56) = 12.48 mm, steel Through the target. This means at least 10 mm passed t ... |
4-1-2015 at 14:17
by: Laboratory of Liptakov |
EFP 22
On the overall, final performance thus affects everything. My assembly was buried in the sand. There ... |
4-1-2015 at 10:03
by: Laboratory of Liptakov |
test
Thank you for your trust. For testing TACN is a good charge 10 grams, diameter 15-20 mm. Attach to ... |
3-1-2015 at 10:14
by: Laboratory of Liptakov |
EFP
Here is a successful attempt. Overcome 10 mm mild steel... ...LL
[file]36281[/file] |
3-1-2015 at 06:07
by: Laboratory of Liptakov |
etn
This is an interesting change, but it's still pretty good sensitivity. Clean fresh ETN, hammer almos ... |
2-1-2015 at 14:07
by: Laboratory of Liptakov |
EFP
This is a misunderstanding. Liner is 1 mm thick soft copper. It is on the picture. EM is an ecologic ... |
2-1-2015 at 09:42
by: Laboratory of Liptakov |
EFP 22
Ladies and gentlemen, here it is. The first attempt failed, but the second attempt, yes. It really w ... |
2-1-2015 at 08:55
by: Laboratory of Liptakov |
EFP
Thank you, here's left: Liner diameter Cu 28/30,5 mm and plast container for pressing 30,5x45 hi 42. ... |
31-12-2014 at 03:47
by: Laboratory of Liptakov |
liner EFP
This post is designed especially for today's youth. Only by using hand drills can produce tools for ... |
30-12-2014 at 11:25
by: Laboratory of Liptakov |
HMTD problem
Glasses is from the production process. How thick slurry formed. Unfortunately, I did not write it ... |
30-12-2014 at 11:00
by: Laboratory of Liptakov |
TeACN
If you use a sparkler, a bomb buried in the sand is not possible. For example, 10 g TACN composition ... |
30-12-2014 at 00:12
by: Laboratory of Liptakov |
pressing
To be a good result, it is necessary to use a steel tools production liner and the same steel tool ... |
29-12-2014 at 11:41
by: Laboratory of Liptakov |
safety
TGT. It seems that many do not know about TACN. You've read the thread Cyklonan? Modified TACN can d ... |
29-12-2014 at 07:40
by: Laboratory of Liptakov |
| [Next Page] |
