Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Search
[Next Page]
Illuminating Gasampules
I think it's usually placed under the secondary, but you could try both and see which works better.
14-3-2024 at 09:58
by: Sir_Gawain
Illuminating Gasampules
The first thing that comes to my mind is a slayer exciter powered pancake coil. It's a very simple c ...
14-3-2024 at 09:39
by: Sir_Gawain
NH4NO3?
You can get pure ammonium nitrate by reacting it with ammonium sulfate or carbonate, then filtering ...
13-3-2024 at 10:01
by: Sir_Gawain
Amazon selling primary explosives
I was searching for methyl ethyl ketone and found this:[url]https://www.amazon.com/Mek-Peroxide-Cata ...
8-3-2024 at 11:54
by: Sir_Gawain
The Short Questions Thread (4)
[rquote=691381&tid=25055&author=yobbo II]
'Very informative... I try this in my newly buy r ...
6-3-2024 at 13:09
by: Sir_Gawain
New ETN Synthesis
I’ve never had problems with ETN stability. If properly neutralized and stabilized it will last ye ...
6-3-2024 at 08:54
by: Sir_Gawain
Det Cap Strategies
I once tested a 1g ETN detonator by drilling a hole in a chunk of lead just big enough for it to fit ...
29-2-2024 at 08:53
by: Sir_Gawain
Det Cap Strategies
You definitely don’t want to plasticize the NHN - it would slow down the burn rate to much. It mig ...
29-2-2024 at 06:41
by: Sir_Gawain
Multiple bad experiences with AliExpress
[rquote=691079&tid=160122&author=woelen]
At the same time, I also purchased something from ...
26-2-2024 at 12:25
by: Sir_Gawain
Det Cap Strategies
Damage depends greatly on the hardness of the steel test plate. Also, it looks like you (LL) used st ...
26-2-2024 at 10:11
by: Sir_Gawain
1,4-Dioxane from Ethylene Glycol and H2SO4
I was distilling dioxane over sodium metal once and it distilled to dryness (I should have watched i ...
26-2-2024 at 10:05
by: Sir_Gawain
Clean burnt/melted plastic off concrete.
The nitric acid is probably reacting with the concrete. If any acid gets under the plastic, it shoul ...
20-2-2024 at 17:30
by: Sir_Gawain
Synthesis of terephthalic acid from a PET water bottle
Heating is absolutely necessary. I tried this procedure with 20 g of finely chopped pet plastic and ...
19-2-2024 at 17:10
by: Sir_Gawain
Cleaning the cooling jacket of a condenser
I've found sodium carbonate and percarbonate to be very effective cleaners, no matter what the stain ...
15-2-2024 at 07:19
by: Sir_Gawain
New ETN Synthesis
[rquote=690801&tid=155655&author=dettoo456]Would you choose the azeo HNO3 even over NH4NO3?
...
9-2-2024 at 18:44
by: Sir_Gawain
New ETN Synthesis
I tried adding the erythritol to sulfuric acid, then adding nitric acid, and got a horrible yield. A ...
9-2-2024 at 15:38
by: Sir_Gawain
Rare catalyst, reagents and ultrra oure metal powders for sale
Welcome to the forum!
8-2-2024 at 21:02
by: Sir_Gawain
Cheapest, best, most available ammonium nitrate sensitizers?
Sounds like one heck of a bang!:D
8-2-2024 at 20:59
by: Sir_Gawain
New ETN Synthesis
I think this preparation could work if someone did a lot of experimenting to optimize it for a large ...
8-2-2024 at 05:22
by: Sir_Gawain
Trinitrotoluene preparation
Heating an acid mixture that possibly contains an explosive just seems like a bad idea to me. Even a ...
7-2-2024 at 19:38
by: Sir_Gawain
New ETN Synthesis
I’ve had bad yields with as little as 20g erythritol. This reaction really doesn’t work well abo ...
7-2-2024 at 19:36
by: Sir_Gawain
Nitric acid from ammonium nitrate and sodium bisulfate
Even with the low temperature method (AN&sulfuric acid) the ammonium nitrate decomposes to some ...
6-2-2024 at 19:11
by: Sir_Gawain
Cheapest way to get the highest amount of ETN?
I had a runaway once; I cooled the sulfuric acid/AN to about -15 C, then added the erythritol fairly ...
4-2-2024 at 20:46
by: Sir_Gawain
New ETN Synthesis
In my experience with this preparation, it doesn’t seem to scale well for some reason. I recently ...
4-2-2024 at 20:39
by: Sir_Gawain
Eutectic salts for heating bath alternative
And what happens when 300C nitrate comes into contact with something combustible?
2-2-2024 at 10:50
by: Sir_Gawain
[Next Page]

  Go To Top