| Search |
| [Next Page] |
LP Chemicals
Very good points, and I agree. I must say though, the comparison of road deaths to attacks has littl ... |
10-10-2012 at 10:39
by: Bot0nist |
1,3,5-trichlorohexahydrotriazine
Must be very dry, and dry it fast. Mine decomposes even after a good wash into a yellow stain when l ... |
8-10-2012 at 18:41
by: Bot0nist |
Fuel Air Explosions
The vapor needs to expand rapidly before ignition. A good flashpowder should do this fine, and a sec ... |
8-10-2012 at 18:33
by: Bot0nist |
Fuel Air Explosions
A small flash charge laid underneath a small ziplock bag of kerosene or similar should disperse and ... |
8-10-2012 at 18:15
by: Bot0nist |
Making metal powders
It has been touched on in this thread, but never plainly stated. A very fine Cu powder can be had ea ... |
8-10-2012 at 17:25
by: Bot0nist |
Smokeless
"Smokeless powder" has largely repalced black powder and most other oxidizer/fuel compositions in mo ... |
8-10-2012 at 16:30
by: Bot0nist |
Welcome our newest troll : Bummer
And he is banned. Thank science.
And thank you mods for always quickly handling these little turds ... |
8-10-2012 at 08:28
by: Bot0nist |
Fuel Air Explosions
An interesting twist on the "whoosh jug" can be had by pouring around 15 ml of 3%H<sub>2</ ... |
8-10-2012 at 08:22
by: Bot0nist |
Golden Powder
Buy it 99.9 percent pure online, or get a supplement with an proper label.
Why did you not post t ... |
7-10-2012 at 15:25
by: Bot0nist |
Distillig ethanol from corn mash. Help?
"Rack" simply means to siphon all the liquids off the settled, dormant yeast. |
7-10-2012 at 15:22
by: Bot0nist |
Welcome our newest troll : Bummer
"Dont feed the trolls."
So true, and i see your point. I was thinking an IP ban, but proxies woul ... |
7-10-2012 at 13:20
by: Bot0nist |
Welcome our newest troll : Bummer
 For those of you that missed it, new member bummer, the self proclaimed asshole
had a lot of f ... |
7-10-2012 at 08:31
by: Bot0nist |
I made some nitric acid
Congrats on a successful project.
Add some concentrated H<sub>2</sub>SO<sub>4&l ... |
6-10-2012 at 12:20
by: Bot0nist |
Sulfuric acid on skin contact
Mmmm, nitro-skin. Pretty sure Vulture has a thread on this in Whimsy.
A concentrated nitrating ba ... |
6-10-2012 at 09:33
by: Bot0nist |
Sulfuric acid on skin contact
Cold, concentrated sulfuric acid has been on my hands many times with no harm. Just rinsed away quic ... |
6-10-2012 at 08:43
by: Bot0nist |
any interesting reactions than can be done with camphor ?
There is a thread from a bit back that theorizes a camphor peroxide and postulates its possible ener ... |
5-10-2012 at 19:00
by: Bot0nist |
The Wick Filter/Open Air Siphon
Just decant first if possible, then vac filter and wash your percipitate. No need to take your shoel ... |
5-10-2012 at 02:35
by: Bot0nist |
Ester nomenclature being used wrong?
Take the political talk to another forum. His signature was for chemistry material sourcing reasons, ... |
4-10-2012 at 15:26
by: Bot0nist |
Ester nomenclature being used wrong?
Check the english wiki artical for a good explanation. An organic or inorganic acid... at least one ... |
1-10-2012 at 18:07
by: Bot0nist |
Nitric / sulfuric acid mixture question
No problem. Welcome to SciMad. |
1-10-2012 at 17:40
by: Bot0nist |
Nitric / sulfuric acid mixture question
Yes.
P.S. Please post inqiures like this, without references in beginnings, not in org chem, wher ... |
1-10-2012 at 16:31
by: Bot0nist |
Nitric / sulfuric acid mixture question
A fume hood...
The fumes are NOx and should be avoided. Pre cooling reatcants, keeping the nitrat ... |
1-10-2012 at 15:22
by: Bot0nist |
Making hydrochloric acid
Standard Distillation should give the highest concentration possible (azeotrope), or lead evolved HC ... |
30-9-2012 at 16:36
by: Bot0nist |
Making hydrochloric acid
Due to the azeotrope, water vapor, and HCl will be released past a certian point. |
30-9-2012 at 12:51
by: Bot0nist |
Exotic Golden Powder compositions
I agree that pulverizing should be fine. potassium nitrate is not known to create impact sensitive c ... |
30-9-2012 at 12:18
by: Bot0nist |
| [Next Page] |
