Search |
[Next Page] |
AP from table salt. Not in my case. Yes, muriatic acid is another name for hydrochloric acid. If you are concerned about the purity of t ... |
5-10-2021 at 02:59 by: Microtek |
AP from table salt. Not in my case. Do you adjust the pH? IIRC, you need to keep it slightly acidic (usually by periodically adding hydr ... |
1-10-2021 at 12:47 by: Microtek |
Chlorate and benzoate mixture initiation power Black powder has been used for initiating NG, so I'm quite sure this mix could initiate sensitive se ... |
10-9-2021 at 01:14 by: Microtek |
DIY Low Temperature Refractory Plaster/Cement? Do you have any sort of references documenting problems with Al-compounds? Al-salts are found in sea ... |
10-8-2021 at 03:32 by: Microtek |
Why are sulfuric acid ratios the same for nitrate salt and nitric acid? Apart from the lower viscosity, another advantage to HNO3/H2SO4 over XNO3/H2SO4 is that the sulfuric ... |
9-8-2021 at 22:52 by: Microtek |
Thermite Heat Whille Mixing Another possibility if you were using a wet electrolytic process for the iron oxide, is that you ina ... |
16-7-2021 at 23:46 by: Microtek |
Fact Check-Smokeless Gunpowder from Scratch I agree that nitroglycerine would be just as easy as NC. NG is not nearly as sensitive as some ficti ... |
3-6-2021 at 02:57 by: Microtek |
Comparison between Keto RDX;RDX;PETN Was the explosives compared based on weight or volume? Equal weight is probably the most obvious, bu ... |
1-6-2021 at 01:27 by: Microtek |
Best books on energetic materials? Depending on how much experience you have I would suggest COPAE (Chemistry of Powders and Explosives ... |
31-5-2021 at 12:41 by: Microtek |
Nitrotetrazolate 2N-oxide I've been wondering about this too. Maybe its used as a phase transfer catalyst for getting the prod ... |
9-4-2021 at 02:44 by: Microtek |
Successful Synthesis of 1-Amino-3-nitroguanidine Nitrate Aluminum will react with the reaction products of the detonation, since it is much more electroposit ... |
25-1-2021 at 11:22 by: Microtek |
shock sensitive mixtures of KNO3 KNO3 and red phosphorus is friction sensitive enough to be set off by firm action of ceramic pestle ... |
10-12-2020 at 01:23 by: Microtek |
What makes a substance capable of detonation? As you point out yourself with azides, a redox reaction is not mandatory. Your second point is a muc ... |
6-12-2020 at 23:47 by: Microtek |
Single component rocket fuels If you wan't (almost) single component, I would suggest that you look up the Jetex model rocket moto ... |
2-11-2020 at 13:51 by: Microtek |
erythritol tetranitrate recrystallization Esterifications like this O-nitration of erythritol are equilibrium reactions, so adding water (one ... |
30-9-2020 at 22:05 by: Microtek |
HMX via nitrolysis of DPT 50C, just like the urea method. I think this is a temperature sweetspot that is high enough that the ... |
28-9-2020 at 07:19 by: Microtek |
HMX via nitrolysis of DPT I find that 5-10 minutes is plenty for purging the NOx from the nitric. As you have noted, you do lo ... |
25-9-2020 at 09:32 by: Microtek |
Swarm ideas needed: Many chemicals but little time: What's the most amazing stuff to make within one day? I would suggest a safer primary as a first step, since any exotic HE you decide to make will need to ... |
20-7-2020 at 12:54 by: Microtek |
New ETN Synthesis The second test looks better IMO. I think you should consider the possibility that the detonator is ... |
15-7-2020 at 11:49 by: Microtek |
New ETN Synthesis With that much HE, you should have spalling on the back side, if the charge went properly high order ... |
14-7-2020 at 01:03 by: Microtek |
how to predict performance of a propellant in relation to another propellant If you wanted to use the ideal gas law, you would need the number of moles of gas in the barrel. Thi ... |
27-6-2020 at 11:05 by: Microtek |
PETN and RDX doubts Your questions reveal many fundamental errors in your understanding. You should read through some of ... |
16-6-2020 at 02:26 by: Microtek |
Stability of picric Acid (Trinitrophenol) Be sure to distinguish between (chemical) stability and sensitivity to external stimuli. Picric acid ... |
30-5-2020 at 14:16 by: Microtek |
Plasticiser question. That paper seems pretty amateurish (for instance, they do not specify what kind of "carbon-based sol ... |
18-5-2020 at 22:43 by: Microtek |
Recycling sulfuric acid from ETN synthesis I'm talking about this:
https://www.europarl.europa.eu/news/en/headlines/security/20190222STO2840 ... |
14-5-2020 at 10:56 by: Microtek |
[Next Page] |