Thionyl chloride

Thionyl chloride

Names
IUPAC name Sulfurous dichloride
Other names Dichlorosulfoxide Sulfinyl chloride Sulfinyl dichloride Sulfur monoxide dichloride Sulfur oxide dichloride Sulfurous oxychloride Sulfuryl(IV) chloride Thionyl dichloride
Identifiers
Jmol-3D images	Image
SMILES ClS(Cl)=O
Properties
Chemical formula	SOCl2
Molar mass	118.97 g/mol
Appearance	Colorless fuming liquid (fresh) Yellowish fuming liquid (old)
Odor	Suffocating, sulfur dioxide-like
Density	1.638 g/cm3 (at 20 °C)
Melting point	−104.5 °C (−156.1 °F; 168.7 K)
Boiling point	74.6 °C (166.3 °F; 347.8 K)
Solubility in water	Reacts
Solubility	Miscible with benzene, carbon tetrachloride, chloroform
Vapor pressure	15.7 kPa (25 °C) 4.7 kPa (0 °C) 384 Pa (-40 °C)
Thermochemistry
Std molar entropy (So298)	309.8 kJ/mol (gas)
Std enthalpy of formation (ΔfHo298)	-245.6 kJ/mol (liquid)
Hazards
Safety data sheet	ScinceLab
Flash point	Non-flammable
Related compounds
Related compounds	Sulfuryl chloride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Thionyl chloride is an inorganic compound with the chemical formula SOCl₂. It is an extremely useful compound in chemistry, but it is extremely dangerous and toxic.

Thionyl chloride is sometimes confused with sulfuryl chloride, SO₂Cl₂, but the properties of these compounds differ significantly: Thionyl chloride is a source of chloride ions, while sulfuryl chloride is a source of chlorine.

Properties

Chemical

Thionyl chloride reacts on contact with water to form sulfur dioxide and hydrogen chloride/hydrochloric acid mist, process which is extremely exothermic:

SOCl₂ + H₂O → 2 HCl + SO₂

Thionyl chloride will convert carboxylic acids to acyl chlorides:

SOCl₂ + RCO₂H → RC(O)Cl + SO₂ + HCl

This reaction can be used to synthesize acetic anhydride.

Physical

Thionyl chloride is a colorless oily liquid that fumes in air. Old samples have a yellowish color, due to decomposition. Light accelerates its decomposition. Thionyl chloride reacts with water, carboxylic acids, alcohols and all protic solvents. It is however miscible and soluble in most aprotic solvents, such as benzene, carbon tetrachloride, chloroform, diethyl ether, toluene, xylene. Thionyl chloride melts at −104.5 °C and boils at 74.6 °C. It has a density of 1.638 g/cm³ at 20 °C.

Availability

Thionyl chloride is sold by various chemical suppliers, but due to its hazards it's not available to the amateur chemist.

Certain batteries contain small amounts of thionyl chloride, but it's impractical to extract it.

Thionyl chloride is listed on schedule 3 of the Chemical Weapons Convention and ordering large amounts may draw attention of the authorities.

Preparation

Unlike its similar compound sulfuryl chloride, thionyl chloride is much more difficult to synthesize.

Industrially it's prepared by reacting sulfur trioxide with sulfur dichloride:

SO₃ + SCl₂ → SOCl₂ + SO₂

The resulting thionyl chloride is extracted via fractional distillation, best in low light conditions, under dry atmosphere.

A more dangerous method involves the reaction between sulfur dioxide and phosgene:

SO₂ + COCl₂ → SOCl₂ + CO₂

However, due to phosgene's extreme toxicity, it's best to avoid this reaction all together.

Projects

• Make acyl chloride
• Make anhydrous metal chlorides
• Make anhydrous alcoholic solutions of HCl

Handling

Safety

Thionyl chloride is extremely toxic and should not be handled unless you're a professional. It reacts violently with water to give sulfur dioxide and hydrochloric acid, which are toxic and corrosive.

Storage

Thionyl chloride is best stored in sealed bottles, in a special cabinet, away from any light and moisture.

Disposal

Thionyl chloride can be safely neutralized with an alkaline slurry or with dry calcium or sodium carbonate or bicarbonate.

References

Relevant Sciencemadness threads

• thionyl chloride synthesis
• HELP! need thionyl chloride(SOCl2) synthesis
• thionyl chloride and potassium dichromate