Difference between revisions of "Boron trioxide"
(→Relevant Sciencemadness threads) |
(→Preparation) |
||
| Line 128: | Line 128: | ||
==Preparation== | ==Preparation== | ||
| − | Boric acid can be dehydrated above 300 degrees to form boron trioxide. Boron trioxide | + | Boric acid can be dehydrated above 300 degrees to form boron trioxide. Boron trioxide prepared at up to 800 degrees is a desiccant but it is slow acting if not finely powdered. Made at higher temperature it has an induction period. |
==Projects== | ==Projects== | ||
Revision as of 20:14, 9 December 2016
| |
| Names | |
|---|---|
| IUPAC name
Boron trioxide
| |
| Properties | |
| B2O3 | |
| Appearance | Hard glassy solid or white powder. |
| Density | 2.460 g/cm3, liquid; 2.55 g/cm3, trigonal; |
| Melting point | 450 °C (842 °F; 723 K) |
| Boiling point | 1,860 °C (3,380 °F; 2,130 K) |
| Solubility | methanol |
| Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
| Infobox references | |
Boron trioxide is a glass like solid or white powder with the chemical formula B2O3.
Contents
Properties
Chemical
Boron trioxide is very unreactive. It can however be reduced to elemental boron with magnesium or aluminum powder in a thermite reaction.
Physical
When produced from boric acid, it forms as a non crystaline mass that is very hard and difficuilt to grind, forming a very fine powder when ground very similar to a solid plane of glass.
Availability
It is used in glassmaking, whether as a boron additive for making borosilicate glass or as a fluxing agent so this may be a source, however it is easy to produce from the starting materials boric acid or borax.
Preparation
Boric acid can be dehydrated above 300 degrees to form boron trioxide. Boron trioxide prepared at up to 800 degrees is a desiccant but it is slow acting if not finely powdered. Made at higher temperature it has an induction period.
Projects
- Producing boron
- Making the ester trimethyl borate
Handling
Safety
Storage
No special storage is required, storing it in closed bottles is fairly enough.
