Difference between revisions of "Burner"
(→See also) |
|||
| (4 intermediate revisions by the same user not shown) | |||
| Line 23: | Line 23: | ||
==Other burners== | ==Other burners== | ||
===Blow torch=== | ===Blow torch=== | ||
| − | Available in dozens of models, they use [[propane]], | + | Available in dozens of models, they use [[propane]], propane-[[butane]] or MAPP gas as fuel to achieve very hot flames. |
===Camping stove=== | ===Camping stove=== | ||
| Line 32: | Line 32: | ||
===Oxy-fuel torch=== | ===Oxy-fuel torch=== | ||
| − | More commonly used for welding/cutting metal, they use [[acetylene]] or [[hydrogen]] as fuel. Unlike blow torches, oxy-fuel ones don't use atmospheric oxygen, but rather oxygen from a compressed gas tank. Can reach very high temperatures, of around 3,500 °C for oxy-acetylene and 2,253 °C for oxy-hydrogen. Using an oxy-fuel torch to heat glassware or other lab equipment is a stupid | + | More commonly used for welding/cutting metal, they use [[acetylene]] or [[hydrogen]] as fuel. Unlike blow torches, oxy-fuel ones don't use atmospheric oxygen, but rather oxygen from a compressed gas tank. Can reach very high temperatures, of around 3,500 °C for oxy-acetylene and 2,253 °C for oxy-hydrogen. Using an oxy-fuel torch to heat glassware or other lab equipment is a stupid idea, as the hot flame may damage such equipment and valuable fuel is wasted. They are however useful when doing glassworking. |
==Availability== | ==Availability== | ||
| − | Alcohol, Bunsen, Teclu, Meker and Tirrill burners are sold by most | + | Alcohol, Bunsen, Teclu, Meker and Tirrill burners are sold by most lab suppliers. Sometimes such items can be found in some hardware stores. |
Other types of burners can be bought from most hardware and camping stores. | Other types of burners can be bought from most hardware and camping stores. | ||
==DIY burners== | ==DIY burners== | ||
| + | Usually there's no need to make your own burner, as they tend to be quite cheap and it's better to simply buy them. | ||
| + | |||
| + | You can assemble a simple burner using cast iron plumbing parts, which are readily available in most hardware and home improvement stores. [https://www.youtube.com/watch?v=vVWdx9Tnl88 Doug's Lab made a video] on this method, and the performance is very good. | ||
| + | |||
| + | However, if your burner doesn't generate a temperature high enough for your needs, you can modify an already existing burner to give a hotter flame, by increasing the air flow to the flame. Here's [https://www.youtube.com/watch?v=eO8NwseRxSA a good video] on how to do it. | ||
==Projects== | ==Projects== | ||
| + | *Cheap and convenient heat and open flame source | ||
*Heat beakers and flasks | *Heat beakers and flasks | ||
*Glassworking | *Glassworking | ||
Latest revision as of 12:44, 3 August 2019
 |
This article is a stub. Please help Sciencemadness Wiki by expanding it, adding pictures, and improving existing text.
|
A burner is a device used to generate a flame by using a gaseous fuel, to heat up flasks, melt or vaporize materials, or apply some other form of heat treatment to various items.
Contents
General
Burners consist of a metal or ceramic body where the fuel is supplied, either directly from a reservoir/tank or through some tubing in the metal device through one end and comes out through the nozzle, where it burns, releasing a flame. Some burners have an air inlet to mix the fuel gas with air, to enable complete combustion. The fuel used in burners can be gas (acetylene, natural gas, propane, etc.), liquid (alcohol, naphta, etc.) or solid (hexamine).
Types
Alcohol burner
Consist of a glass or metal bottle, containing the liquid fuel, a lid with a cotton wick which is immersed in the fuel and a separate cap, used to put out the flame, similar in operation to that of a Zippo lighter. The wick draws the fuel up where it's ignited, causing it to burn. The flame consumes the fuel, and due to capilarity more fuel is drawn, continuously feeding the flame. The most common fuel used are alcohol (ethanol, isopropanol, ethanol), hence the name, while other flammable liquids like acetone or naphta are rarely used. Alcohol burners don't generate very hot flame, and aren't used for heating large amounts of liquid.
Bunsen burner
In a Bunsen burner, the gas (fuel) goes up through the base through a small hole at the bottom of the barrel and is directed upward. There are open slots in the side of the tube bottom to allow air into the stream via the Venturi effect, and the gas burns at the top of the tube once ignited by an external flame source.
Meker-Fisher burner
More commonly knows as Meker burner, it can produce a hotter flame than other burners. It can also produce a larger-diameter flame. Unlike the Bunsen or Teclu burners, the flame produced by Meker burner burns without noise.
Teclu burner
The main aspect of this type of burner is that its lower part posses a conical tube, with a round screw nut below its base. The Teclu burner provides better mixing of air and fuel which is what allows it to achieve higher flame temperatures than the Bunsen burner.
Tirrill burner
The base of the burner has a needle valve which allows the regulation of gas intake directly from the burner, rather than from the gas source. Can achieve temperatures as high as 1560 °C.
Other burners
Blow torch
Available in dozens of models, they use propane, propane-butane or MAPP gas as fuel to achieve very hot flames.
Camping stove
Useful for a quick and convenient boiling of non-flammable liquids.
Fuel tablet burner
Uses hexamine or petroleum wax as fuel. Unlike other solid fuels, hexamine fuel tablets produce little smoke or odor.
Oxy-fuel torch
More commonly used for welding/cutting metal, they use acetylene or hydrogen as fuel. Unlike blow torches, oxy-fuel ones don't use atmospheric oxygen, but rather oxygen from a compressed gas tank. Can reach very high temperatures, of around 3,500 °C for oxy-acetylene and 2,253 °C for oxy-hydrogen. Using an oxy-fuel torch to heat glassware or other lab equipment is a stupid idea, as the hot flame may damage such equipment and valuable fuel is wasted. They are however useful when doing glassworking.
Availability
Alcohol, Bunsen, Teclu, Meker and Tirrill burners are sold by most lab suppliers. Sometimes such items can be found in some hardware stores.
Other types of burners can be bought from most hardware and camping stores.
DIY burners
Usually there's no need to make your own burner, as they tend to be quite cheap and it's better to simply buy them.
You can assemble a simple burner using cast iron plumbing parts, which are readily available in most hardware and home improvement stores. Doug's Lab made a video on this method, and the performance is very good.
However, if your burner doesn't generate a temperature high enough for your needs, you can modify an already existing burner to give a hotter flame, by increasing the air flow to the flame. Here's a good video on how to do it.
Projects
- Cheap and convenient heat and open flame source
- Heat beakers and flasks
- Glassworking
Handling and safety
Operating a hot flame presents fire risks and fire hazard precautions should be in place.
DO NOT USE BURNERS OF ANY KIND TO DIRECTLY HEAT FLASKS WITH FLAMMABLE SOLVENTS!
